Service manual

www.enc.net.cn/en Tel/Fax:[phone] Function parameter schedule graph
53
count number
arriving provision
F5.26
Specified interior
count number
arriving provision
0－9999 1 0 ○
F5.27
Interior timer
setting
0.1－6000.0s 0.1 60.0 ○
F6－Traverse special function parameter group
Function
code
Name Set range
Min.
unit
Factory
default
Modifi
-cation
F6.00
Traverse function
selection
0: traverse function not used
1: traverse function used
1 0 ×
F6.01 traverse run mode
LED first bit: jump-in mode
0: automatic jump-in mode
1: terminal manual jump-in mode
LED second bit:
0: changing traverse amplitude
1: fixed traverse amplitude
notice: traverse center frequency
input channel set by F0.00 function
parameter
1 00 ×
F6.02
Traverse amplitude
threshold
0.0－50.0(%) 0.1(%) 0.0(%) ○
F6.03
Sudden jumping
frequency
0.0－50.0(%) 0.1(%) 0.0(%) ○
F6.04 traverse cycle 0.1－999.9s 0.1s 10.0s ○
F6.05
Triangle wave
rising time
0.0－98(%)(traverse cycle) 0.1(%) 50.0(%) ○
F6.06
traverse preset
frequency
0.00－400.00Hz 0.01Hz 0.00Hz ○
F6.07
traverse preset
frequency
latency time
0.0－6000s 0.1s 0.0s ○
F7－Frequency provision function parameter group
Function
code
Name Set range
Min.
unit
Factory
default
Modifi
-cation
F7.00 VCI min. provision 0.00－F7.02 0.01V 0.00V ○
F7.01 VCI min. provision corresponding freq. 0.00－high limit frequency 0.01Hz 0.00 Hz ○
F7.02 VCI max. provision 0.00－10.00V 0.01V 9.9V ○
F7.03 VCI max. provision corresponding freq. 0.00－high limit frequency 0.01 Hz 50.00 Hz ○
F7.04 CCI min. provision 0.00－F7.06 0.01V 0.00V ○
F7.05 CCI min. provision corresponding freq. 0.00－high limit frequency 0.01 Hz 0.00 Hz ○
F7.06 CCI max. provision 0.00－10.00V 0.01V 9.9V ○
F7.07 CCI max. provision corresponding freq. 0.00－high limit frequency 0.01 Hz 50.00 Hz ○
F7.08 YCI min. provision 0.00－F7.10 0.01V 0.00V ○
F7.09 YCI min. provision corresponding freq.
0.00－high limit frequency
(reverse run)
0.01 Hz 50.00 Hz ○
F7.10 YCI max. provision 0.00－10.00V 0.01V 9.9V ○
F7.11 YCI max. provision corresponding freq.
0.00－high limit frequency
(forward run)
0.01 Hz 50.00 Hz ○
F7.12 YCI dead area setting 0.00V－2.00V 0.01V 0.10V ○