Service manual

control method, independently form dual-frequency digital PID control system,
automatically identify the diameter of reel roll, the mechanical transmission ratio,
cable diameter, automatically adjust the PID parameters, track the speed of the
host, that is to pole zero of the tension balance when it powers on (middle point),
is a real sense of the fool-type inverter special for drawing machine. As long as
the correct general electrical wiring, you can work. Whether it is an empty plate,
half plate, full plate, or the low speed, medium speed, high speed, which ensures a
smooth start, smooth operation, constant tension when wire drawing machine at
work, as well as achieving start, stop at any time. Complete replacement of
external PID board to make the system more compact, cheaper, easier to maintain,
while controlling effect is more stable.
In order to maintain constant tension of the close and put, the inverter special
for drawing machine is to be in a relatively short period of time acceleration and
deceleration. During the process of acceleration and deceleration, the inverter
must provide larger start-up current, braking current and resulted in higher DC bus
voltage, thus it needs external braking resistor.
Appendix 1 only makes instructions of controlling function of the inverter
special for drawing machine, please use with EDS1000 manual simultaneously
when operating.
Assembling wiring, parameter setting, troubleshooting and daily maintenance
notices are available in this manual. To make sure that you can correctly assemble
and operate EDS1000 series inverters to exert their excellent performance, please
read this user manual detailed before you assemble the device and conserve the
manual appropriately before the end-user get them.
Please contact our office or dealer in all places at any moment if you have any
doubts or special demands when using these inverters, and you can also contact
our after service center in our Headquarters directly. We will serve you with all
our heart.
We reserve our right to notice you if we change contents of this manual.
Welcome to choose other inverters of our company:
 EN600 series hi-performance flux vector inverter
 EN500 series universal multi-function vector inverter
 EDS-V300 series sensorless current vector control inverter
 EDS800 series mini inverter