Service manual

www.enc.net.cn/en Tel/Fax:[phone] Appendix 1 EDS1100 Drawing machine Inverter Manual
152
7.1.2 Wire receiving machine parameters of fine-drawing machine and
micro-pulling machine（EDS1000 Series）
Function Code Function Name Factory Value Setting
F0.02 Run command channel selection 0 1
F0.03 Run direction setting 000 010
F0.08 Acceleration time 1 20.0 2.0
F0.09 Deceleration time 1 20.0 2.0
F0.10 Upper limit Frequency 50.00Hz 75.00
F1.05 Stop mode 0 2
F1.06 DC brake initiative freq. when stop running 0.00 3.00
F1.07 DC brake time when stop running 0.0 1.5
F1.08
DC brake voltage when stop running 0
8
F2.00 Analog filter time constant 0.20s 0.03
F2.18 Acce. time 2(when start up smoothly ) 20.0 150.0
F2.19 Dece. time 2(when start up smoothly ) 20.0 150.0
F2.21
Interval time 1of retracting volume diameter
calculation
500ms 300
F2.22 Empty diameter gain(retracting and releasing gain) 100.0 40.0
F2.23 PID adjustor gain 30.0 30.0
F2.24 Start-up volume diameter calculation gain selection 0 0
F2.25
Start-up volume diameter calculation gain(volume
diameter calculation gain 4)
2.0 1.0
F2.26 Volume diameter calculation gain 3 0.4 0.4
F2.27 Volume diameter calculation gain 2 0.0 0.0
F2.28 Volume diameter calculation gain 1 0.0 0.0
F2.29 High limit of retracting volume gain 200.0 100.0
F2.30 Start-up retracting and releasing gain control 1 1
F2.31 Retracting and releasing speed gain +/- control 0 0
F2.32 Retracting and releasing recombination control 0 0
F2.33
Interval time 0of retracting volume diameter
calculation
800 800
F2.34
Dead zone range of retracting volume diameter
calculation
0.10 0.10
F2.35 Range 1of retracting volume diameter calculation 1 0.70 0.70
F2.36 Range 2 of retracting volume diameter calculation 1.20 1.20
F2.37 Range 3 of retracting volume diameter calculation 1.70 1.70
F2.38 Range 4 of retracting volume diameter calculation 2.20 2.20
F2.39 time of starting up smoothly 2000 2000
F2.40 Start up PID again control 1 1
F2.41 Start up PID smoothly selection 1 1
F2.42 Volume diameter reset control 0 0