Service manual

www.enc.net.cn/en Tel/Fax:[phone] Detailed function description
101
6.8 Frequency provision function parameter group: F7
F7.00 VCI min. provision Range: 0.00－F7.02 0.00V
F7.01
VCI min. provision
corresponding freq.
Range: 0.00－high limit
frequency
0.00Hz
F7.02 VCI max. provision Range: 0.00－10.00V 9.9V
F7.03
VCI max. provision
corresponding freq.
Range: 0.00－high limit
frequency
50.00Hz
F7.04 CCI min. provision Range: 0.00－F7.06 0.00V
F7.05
CCI min. provision
corresponding freq.
Range: 0.00－high limit
frequency
0.00Hz
F7.06 CCI max. provision Range: 0.00－10.00V 9.9V
F7.07
CCI max. provision
corresponding freq.
Range: 0.00－high limit
frequency
50.00Hz
F7.08 YCI min. provision Range: 0.00－F7.10 0.00V
F7.09
YCI min. provision
corresponding freq.
Range: 0.00－high limit
frequency(REV)
0.00Hz
F7.10 YCI max. provision Range: 0.00－10.00V 9.9V
F7.11
YCI max. provision
corresponding freq.
Range: 0.00－high limit
frequency(FWD)
50.00Hz
traverse preset freq.
run command
Dece per
Dece time
Accel per
accel time
weaving
start-up latency
time F6.07
traverse cycle
Run freq. Hz
a
-AW
+AW
weaving sudden
jumping freq.
=AW*F6.03
stop command
triangle wave rising time
traverse low limit F
L
center freq.Fset
traverse high limit F
h
Traverse amplitude
AW=Fset*F6.02
Fig. 6-37 Traverse
time