User's Manual

17
5.14 USB Driver video/picture/audio files can only be
deleted on your PC/laptop.
After being connected to PC, password interface shows up, please enter the
password (default password is 000000) Press the (ok) button 6 times, the
camera will be recognized by the computer as Extra drive. User can go to
camera folder and delete those files not needed.
5.15 Charging
When camera battery is low, the battery icon will flash in the display, and
you will hear a alert tone. When this happens, charge the camera.
While camera is charging, indicator light turns red and will turn green after
camera is fully charged. It will take approximately 4 hours to fully charge the
camera.
Charging methods:
1). Use a USB cable to connect camera’s USB port to a USB port on your
computer (powered on) or USB power adapter (connect to a power outlet)
2). Attach camera to the docking bay. Use a USB cable to connect the
docking bay to a USB port on your computer (powered on) or USB power
adapter (connect to a power outlet).