User's Manual
Table Of Contents
11
Pre-record
When on, a certain time (depend on
video resolution) will be combined into
the recorded video before record
button is pressed to start recording;
When off, video start until the Record
button is pressed to start recording.
Off, On
Post Record
The amount of the time the camera
waits to stop recording video after you
press the Record button.
Off, 5 sec, 1 minute, 10
minutes, 20 minutes,
35 minutes
Dewarp
When on, video distortion correction
will be corrected, with more power
consumption.
Off, On
EIS
When on, electronic image stabilization
is activated to avoid shaky video.
Off, On
CarDV Mode
When on, camera will power up
automatically and start video
recording when it is charged.
Camera will power off as it
normally does when it is
disconnected from the power
source.
Off, On
Loop
Recording
When on, camera will overwrite the
oldest video file with the most current
video file once its memory is full. This
setting can be selected only when car
DVR mode is on.
Off, On
Split Time
While recording video, the camera will
automatically split its recording into
files of this length.
1 min, 3min, 5 min, 10
min, 15 min, 20 min, 30
min, 45min
Photo
Resolution
The photo resolution
40M (8448×4752 16:9)
30M (7304×4104 16:9)
25M (6664×3752 16:9)
20M (5984×3366 16:9)
12M (4608×2592 16:9)
5M (3008×1688 16:9)
Burst
The number of images captured in a
row when you take a photo.
Off, 2, 3, 5, 7, 10, 15,
20, 30