User's Manual

ManualsBrandsShenzhen EDUP Electronics Technology ManualsElectronicsEP-N8508GS

USBWirelessAdapter(RTL8188CUS)Quick

InstallationGuide

Note：ThisManualbasedonWindowsXP&Windows7



1.WindowsXP 

01.OncethewirelessUSBadapterbepluggedintoanUSBport,thefollowingmessagewill

appearonscreen.Click“Cancel”,Asthefollowingpictureshows.(Ifitdoesnotpop‐up,Skip

thisstep)



02. Please insert the disc into your CD‐ROM drive. The disc should auto start, dispaying the

follwingwindow,Ifitdoesnotstartduetothesystemsetting,openthebrowserwindow,findthe

Setup.exefileinyourCD‐ROMfolder,clicktorunit.IfyoudonothaveCD,youcandownloadat

EDUPofficialwebsite:www.szedup.com



03.DoubleclickSetup.exefile,Softwarebegintoinitialization,thenclickthe“next”.Thereshows

theinstallationprogress.

Summary of content (16 pages)

PAGE 1
USB Wireless Adapter(RTL8188CUS) Quick Installation Guide Note：This Manual based on WindowsXP & Windows7 1.WindowsXP 01. Once the wireless USB adapter be plugged into an USB port, the following message will appear on screen. Click “Cancel”, As the following picture shows.(If it does not pop‐up,Skip this step) 02. Please insert the disc into your CD‐ROM drive. The disc should auto start, dispaying the follwing window, If it does not start due to the system setting, open the browser window, find the Setup.
PAGE 2
04. Do not interrupt installation , Click “finish” to finish the driver installation.The computer automatically restart.
PAGE 3
PAGE 4
Wireless Connection （two ways to realize） Wireless Connetion 1 05. 05. Click Icon in the Windows system tray, which locates in the bottom‐right corner of your computer screen or double click , and pops up a message and click”Available Network” Double‐click the utility icon or right click the icon and then select “View Available Wireless Networks” to launch the utility. the Wireless Network Connection window appears and displays your wireless network listed with the SSID you chose.
PAGE 5
If the network security key hasn’t been inputted before, enter the network’s security key to access the wanted SSID. Type the encryption key that you wrote down earlier in both the Network key and Confirm network key boxes, and then click “ok”.
PAGE 6
Wireless Connection 2 06. Click Icon in the Windows system tray, which locates in the bottom‐right corner of your computer screen or double click , pops up a message and click”Windows Zero Config”(Figure1),pay attention to the change of figure2.nad click “ok”button on the pop up page.
PAGE 7
and then select the your preferred network, and then Double click, 07. Double Click Icon enter the network’s security key to access the wanted SSID. Type the encryption key and then click “Connect”.Or choose your wifireless signal and click connect as figure1,and enter the password and then click”connect. Internet now is available.
PAGE 8
PAGE 9
2. Windows7 01. Once the wireless USB adapter be plugged into an USB port (If do not have CD‐ROM.please download on www.szedup.com), put in the CD and find windows file “winxpwinvistawin7win8” andSetup.exe. 02. Double click Setup.exe file, Software begin to initialization,then click the “next”.There shows the installation progress.
PAGE 10
03. Do not interrupt installation, Click “finish” to finish the driver installation.The computer automatically restart.
PAGE 11
Wireless connection (two ways to realize Wireless connection 1： 04. Click Icon in the Windows system tray, which locates in the bottom‐right corner of your computer screen or double click , and pops up a message and click”Available Network” Double‐click the utility icon or right click the icon ,and the Wireless Network Connection window appears then double click the SSID you preferred.
PAGE 12
Type the encryption key that you wrote down earlier in both the Network key and Confirm network key boxes, and then click “ok”.
PAGE 13
PAGE 14
Note:if there is no icon pictures shows: ,please find it in the on right buttom,it have been hide as following . Wireless Connection2. 05. Click Icon which locates in the bottom‐right corner of your computer screen,click the wireless network list and choose the SSID you preferred. and double click(Or click “Connect”).
PAGE 15
Type the encryption key and then click “ok”.
PAGE 16
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.