User's Manual

-3-
Transmitter Features
Wire Stand – Allows you to stand the transmitter on tabletop or it can be reversed
and used as a hanger.
Battery Compartment – holds 2 AAA batteries.
Sensor Socket Hole: plug in for stainless steel probe sensor.
Buttons
Buttons
Soft rubber
sleeve
Sensor socket
hole
TX indication led
Battery Compartment
ºF/ºC/
LCD
1. MODE – Press to select thermometer or timer mode. Press and hold for 2 seconds
to enter Synchronization/Pairing mode.
2. HR – In timer mode, press once to set hour. Press and hold for 2 seconds, the
hours will increase by 10 hours per second. In thermometer mode, press once
to increase the temperature value. Press and hold for 2 seconds, the temperature
value will increase by 10 degrees per second.
3. / –press once to select temperature readings in Celsius or Fahrenheit.
Press and hold for 2 seconds to turn ON/OFF the receiver.
ºF/ºC
4. MIN – In timer mode, press once to set minutes. Press and hold for 2 seconds,
the minutes will increase by 10 minutes per second. In thermometer mode,
press once to decrease the temperature value. Press and hold for 2 seconds,
the temperature value will decrease by 10 degrees per second.
5. MEAT – In thermometer mode, press to select meat type, PROG (program),
GBEEF (ground beef), GPOUL (ground poultry), BEEF, VEAL, CHCKE (chicken),
PORK, POULT (poultry), LAMB & FISH. In Timer mode, press to switch between
hour/minute timer to a minute/second timer and back.
6. START/STOP– In timer mode, press to start or stop the timer.
7. TASTE – In thermometer mode, press to select the meat taste level, RARE,
MED RARE, MEDIUM, MED WELL and WELL DONE.
Wire Stand
ºF/ºC/
to select temperature readings in Celsius or Fahrenheit.
– Press and hold for 2 seconds to turn the transmitter ON or OFF. Press once
-2-
Programmable alert with preset temperatures for specific foods.
23-hour, 59-minute countdown timer and count up timer.
Temperature range of probe: 15.8˚F to 572˚F (-9˚C to 300˚C).
Temperature tolerance of internal food reading: +/-1.8˚F (+/-1.0˚C).
Power source – 2 AAA batteries.
LCD (Liquid Crystal Display)
Probe Temp Reading
Probe Temp
Setting
Taste level
Meat type
Timer
Thermometer Mode Timer Mode