User's Manual

Key Definitions
Remote Transmitter
1. Antenna: Transmits signal from Remote Transmitter to the Collar Receiver.
2. Indicator Light: Flashes green when any of the stimulation buttons
blink red if battery power is low to indicate the transmitter needs recharging.
are pressed. Will
6. Intensity Dial: Rotate the dial to adjust the level of vibration or static shock
stimulation from 0 to 100.
7. Toggle Switch (Dog Selection): Switches control between Collar Receiver 1 or
Collar Receiver 2 (Dog 1 or Dog 2).
4. Vibration Button: Delivers vibration to a Collar Receiver, depending on the position of
the Toggle Switch.
3. Stimulation Button: Delivers electronic pulse stimulation to a Collar Receiver,
depending on the position of the Toggle Switch.
5. Sound Button: Delivers a sound to a Collar Receiver, depending on the position
Toggle Switch.
of the
8. Charging Port: Charges the battery of the Remote Transmitter when connected
power source.
to a
Collar Receiver
2. ON/OFF Button: Powers on/off the Collar Receiver and used for Pairing or
Synchronization of the Collar Receiver to the Remote Transmitter.
1. Contact points: Covers the electrodes, and through them electronic
is delivered.
pulse stimulation
3. Charging Port: Charges the battery of the Collar Receiver when connected to
source.
a power
4. Indicating Light: Flashes green when any of the stimulations are pressed. Will blink
red if the battery power is low to indicate the Collar Receiver needs recharging.
Operating Guide
Prepare the Remote Transmitter and Receiver Collar:
Charge the Remote Transmitter and Receiver Collar
1. Uncover the Charging Port by lifting the rubber cover.
2. Insert the charging connector into the Charging Port.
3. Plug the charger into a standard wall outlet.
4. A solid red light will appear on the Indicator Light, indicating charging is occurring.
5. Once charging is complete, the solid red light will turn to a solid green light.
Step
1
Antenna
Indicator Light
Toggle Switch
Charging Port
Stimulation Button
Vibration Button
Sound Button
Intensity Dial
Contact points
ON/OFF Button
Indicating Light
Charging Port
ENEN
-6- -7-