Manualshelf

User's Manual

ManualsBrandsSHENZHEN ECARE ELECTRONICS ManualsPet SuppliesRechargeable and Waterproof Remote Training Collars
12345678910
Table Of Contents
Operating Guide
Step
1
Prepare the Remote Transmitter and Receiver Collar:
Charge the Remote Transmitter and Receiver Collar
1. Uncover the Charging Jack by lifting the Rubber Cover.
2. Insert the charging connector into the Charging Jack.
3. Plug the charger into a standard wall outlet.
4. A solid red light will appear on the Indicator Light, indicating charging is occurring.
5. Once charging is complete, the solid red light will turn to a solid green light.
6. Replace the Rubber Cover to protect the Charging Jack.
Note: Before first use, charge the Remote Transmitter and Receiver Collar until
completion.
Powering on and off the Remote Transmitter
4. Receiver Indicator Light:
( A ) When the Collar Receiver is charging, the light will be a solid red; it switches
when fully charged.
to green
( B ) In standby status, the Receiver Indicator Light will flash green periodically.
( D ) green light to
appear on the Collar Receiver.
Stimulation Buttons pressed on the Remote Transmitter will cause a
( C ) Pairing the Remote Transmitter and Collar Receiver will produce a solid green light.
Press the Power Button once, the LCD display will appear and the Transmitter Indicator
Light will turn to solid green.
To power off the Remote Transmitter, press the Power Button once again.
-7- -8-
Note, if the unit stops powering on or communicating with each other, please simply
recharge the device, it will reset and begin to operate normally.
Powering on and off the Collar Receiver
Press the Power Button on the receiver to power the unit on or off. When the receiver
is powered on, the indicating light will flash green.
Test the Training System Functions:
The testing methods will help determine whether the training system is functioning
intended. Please ensure that the pairing process is complete before attempting to test the
functionality.
as
3. Power Button: Powers the Collar Receiver on or off, and pair the Collar Receive to
Remote Transmitter.
2
Step
Testing the Static Shock Function
1. Put the test light over the Screws of the Collar Receiver.