User's Manual

Collar Receiver
Toggle Switch
Static Button
Vibration +
Static Button
Indicator Light
Intensity Dial
Power Button
Vibration Button
Tone Button
Charging Jack
Belt Clip
Antenna
Rubber Cover
Remote Transmitter
Key Definitions
Antenna: Transmits signal from Remote Transmitter to the Collar Receiver.
LCD Screen: Indicates the intensity level of stimulation currently selected and
life.
battery
Intensity Dial: Rotate the dial to adjust the level of stimulation from 0 to 100.
Toggle Switch (Dog Selection): Switches between Collar Receiver 1 or Collar
Receiver 2 (Dog 1 or Dog 2).
Power Button: Powers the Remote Transmitter on and off.
Vibration Button: Delivers vibration to a Collar Receiver, depending on the Toggle
Switch.
Tone Button: Delivers a tone to a Collar Receiver, depending on the position of the
Toggle Switch.
Static Button: Delivers electronic pulse stimulation to a Collar Receiver, depending on
the position of the Toggle Switch.
Vibration + Static Button: Delivers vibration and static stimulation to a Collar
Receiver, depending on the position of the Toggle Switch.
Charging Jack: Charges the battery of the Remote Transmitter when connected to a
power source.
Belt Clip: Allows for the possibility of hands free training.
Rubber Cover: Protects the internal components of the Remote Transmitter from dust
and water. Always remember to replace after charging is complete.
-5- -6-
LCD Screen
Contact Points
Power Button
Receiver Indicator Light
Charging Port
1. Contact Points: Contact points cover the metal screws, and through them vibration or
static shock stimulation is delivered.
2. Charging : Charges the battery of the Collar Receiver when connected to a power
source.
Port