User's Manual

-14-
-15-
Frequently Asked Questions:
How old does the dog have to be before using the system?
Your dog should have learned basic obedience commands such as, “sit” or “stay.” The Collar
Receiver might be too large for dogs under 15lbs.
Once my dog completes training and is been obeying my commands, will he
have to wear the collar?
Probably not, but you may try to reinforce training with the collar.
Can I use the Petrainer rechargeable training collar with more than one dog?
Yes, you just need to purchase another Collar Receiver for the system.
Is the Collar Receiver waterproof?
Yes, but always ensure that the Rubber Cover seals the Charging Jack.
Can I replace the Collar receiver with another kind of collar?
No.
Can I attach a leash to the Collar Receiver?
No, this can result in pulling the Contact Points too tightly against the dog's neck.
a separate, nonmetallic collar or a harness. Ensure the extra collar does not put pressure on the
Contact Points.
Attach a leash to
How long can I leave the Collar Receiver on my dog?
The design of the collar discourages constant wearing. We recommend not having the dog wear the
collar for more than 12 hours out of every 24-hour period.
Is the training system suitable for all dogs?
The collar Is adjustable from length 5.9”(15cm) to 19.6”(50cm), if the dog's neck
is smaller than 5.9”, you will be forced to rethread the collar, if the dog's neck circumference is
larger than 22”, this collar may not be suitable for the dog. This collar is not suitable for dogs under
15lbs.
circumference
The Remote Transmitter does not work.
Check the battery status of the Remote Transmitter.
Press and hold the Right Side Button for a few seconds to power on the Remote Transmitter.
I want to test the Collar Receiver on myself, but it does not work.
When testing the Collar Receiver with your hands, please touch the two electrodes
simultaneously, as touching one electrode will not work.
Troubleshooting
My dog is not responding after the training system installed successfully.
Charge the Remote Transmitter and Collar Receiver for 6 hours, separately
before first use.
Ensure if the Remote Transmitter and Collar Receiver power is on.
Check the intensity levels of vibration and static shock, making sure it is not set to 0.
Ensure the Collar Receiver has sufficient power to operate.
Check the collar to ensure it fits snugly against your dog's neck.
If tested for all of the above and the dog is still not responding, please try re-pairing the Remote
Transmitter and Receiver Collar.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
FCC Notice
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.