User's Manual

ManualsBrandsSHENZHEN ECARE ELECTRONICS ManualsPet SuppliesRechargeable and Waterproof Remote Training Collars

Table Of Contents

-10- -11-

Powering on and off the Remote Transmitter

Press the Power Button once, the LCD display will appear and the Transmitter

Indicator Light will turn to solid green.

To power off the Remote Transmitter, press the Power Button once again.

Powering on and off the Collar Receiver

Press the Power Button on the receiver to power the unit on or off. When the receiver

is powered on, the indicating light will flash green.

Test the Training System Functions:

The testing methods will help determine whether the training system is functioning

intended. Please ensure that the pairing process is complete before attempting to test

the functionality.

Testing the Static Shock Function

1. Put the test light over the Screws of the Collar Receiver.

2. Turn on the Remote Transmitter and adjust the Intensity Dial off 100.

Fit the Collar Receiver:

Testing the Vibration Functions

1. Power on the Remote Transmitter, and adjust the Intensity Dial off 100.

2. Press the Vibration Button on your Remote Transmitter.

3. If done correctly, the Collar Receiver will vibrate.

Important: The proper fit and placement of the Collar Receiver is essential for

effective training. The contact points must have direct contact with the dog's skin.

(1) To fit the Collar Receiver, attach the Collar Strap to the Receiver.

(2) With the dog standing in front of you, place the Collar Receiver around the

neck, so the receiver box and Contact Points are on the underside of your dog's neck,

making direct contact with the dog's skin. If direct contact is not possible, shaving

some fur away, to ensure good contact is recommended.

dog's

(3) Fasten the collar strap. The fit should be snug, but not taut. A finger should be

be placed beneath the collar strap when around the dog's neck.

able to

3. Press the Static Shock Button on your Remote Transmitter.

4. If done correctly, the test bulb should flash orange indicating the electronic pulse

stimulation is operating correctly.

Note: If wanting to test the shock function on yourself, please ensure your

hand is across both contact points to ensure the connection is complete. Otherwise, user

will feel no stimulation.

finger or

Testing the Sound Functions

1. Ensure the Toggle Switch is in the correction for the Collar Receiver you're testing.

Press the Sound Button on your Remote Transmitter.

2. If done correctly, the Collar Receiver will emit sound.

(4) Allow the dog to wear the Collar Receiver for several minutes and check the

again. The dog will soon become more familiar with the Collar Receiver, so it is crucial

to ensure the fit comfortable and flattering.

strap

Note: Before first use, charge the Remote Transmitter until completion of the charging

process.

Step