Manualshelf

User's Manual

ManualsBrandsSHENZHEN ECARE ELECTRONICS ManualsPet SuppliesRechargeable and Waterproof Remote Training Collars
12345678910
Table Of Contents
-8-
-9-
Collar Receiver
Transmitter Charging Jack: Charges the battery of the Remote Transmitter when
connected to a power source.
Belt Clip: Allows for the possibility of hands free training.
Rubber Cover: Protects the internal components of the Remote Transmitter from dust
and water. Always remember to replace after charging is complete.
LCD Display: Displays transmitter battery life, intensity level and receiver selection.
ON/OFF Button: Powers on or off the Remote Transmitter.
1. Contact Points: Contact points cover the metal screws, and through them static shock
stimulation is delivered.
2. Collar Receiver Charging Jack: Charges the battery of the Collar Receiver when
connected to a power source.
3. Rubber Cover: Protects the internal components of the Collar Receiver from dust and
water. Always remember to replace after charging is complete.
Collar Receiver
Charging Jack
Receiver
Indicator Light
ON/OFF Button
Rubber Cover
Contact Points
Operating Guide
( A ) When the Collar Receiver is charging the light will be a solid red; it switches to green when fully
charged.
( B ) In standby status, the Receiver Indicator Light will flash green periodically.
( C ) Stimulation Buttons pressed on the Remote Transmitter will cause a green light to appear on
the Collar Receiver.
( D )Powering off the Collar Receiver will give off a red light.
Step
1
Prepare the Remote Transmitter
Charge the Remote Transmitter
1. Uncover the Transmitter Charging Jack by lifting the Rubber Cover.
2. Insert the charging connector into the Charging Jack.
3. Plug the charger into a standard wall outlet.
4. A solid red light will appear on the Transmitter Indicator Light, indicating charging is
occurring.
5. Once charging is complete, the solid red light will turn to a solid green light.
6. Replace the Rubber Cover to protect the Transmitter Charging Jack.
4. ON/OFF Button: Powers on collar receiver and begins pairing sequence when held.
Receiver Indicator Light:
Note, if the unit stops powering on or communicating with each other, please simply
recharge the device, it will reset and begin to operate normally.