Instruction Manual
Table Of Contents
- INSTRUCTION MANUAL
- MODEL #HD-322 PROFESSIONAL
- REMOTE COOKING THERMOMETER
- Congratulations on your purchase of the Professional Remote Cooking Thermometer, a programmable radio frequency food thermometer. You will now be able to remotely monitor the time and temperature of food cooking on your grill from anywhere, even in yo...
- LCD (Liquid Crystal Display) – Displays all icons, temperature and timer. The backlight will flash Blue once the temperature increases 10F, will change to Green when the temperature is within 15F of the set temperature and will turn Red when it reac...
- STAND – Battery compartment clip allows you to be mobile. Clip the receiver unit to belt.
- BATTERY COMPARTMENT – Holds 2 AAA batteries.
- Buttons
- Buttons
- Registration Procedures
- Measure meat temperature to USDA doneness temperature range
- 1. Press MODE to select thermometer mode. The upper display will show a small MEAT and a meat type such as BEEF.
- 4. Once the temperature of meat reaches the preset doneness level the receiver will beep and the LCD backlight will turn red.
- Measure meat temperature set to your specific taste
- Using the Timer
- Procedure for typical use on an outdoor grill:
- The following typical example will go through the steps to have the Professional Remote Cooking Thermometer alert you to when a beef steak is cooked to medium (USDA doneness level) and remind you to rotate hot dogs in 5 minutes.
- 1. Turn on the grill.
- 2. Follow the registration procedure.
- 3. Place steak and hot dogs on grill rack.
- 4. Insert probe sensor into the center of thickest portion of the steak. Avoid touching bone or heavy fat areas. Assume the meat temperature is 45 (F.
- HELPFUL HINTS
- Always wear a heat resistant glove to touch the stainless steel probe sensor or wire during or just after cooking. Do not touch with bare hands.
- Cleaning
- Always wear a heat resistant glove to touch the stainless steel probe sensor or wire during or just after cooking. Do not touch with bare hands.
- Keep the stainless steel probe sensor and wire away from children.
Do not send any parts or product to Maverick without calling and obtaining a Return Authorization Number
and instructions.
This warranty is VOID if instructions for use are not followed; for accidental damage; for commercial use; for
damage incurred while in transit; or if the Professional Remote Cooking Thermometer has been tampered
with.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Replacement Probes
To purchase, out of warranty, stainless steel replacement probes please mail us a check
to the address below and specify probe type:
HD-322 Food Probe $12.00/ea
All prices include shipping & handling. NJ residents add 7% sales tax.
Attn Customer Service
Maverick Industries, Inc.
94 Mayfield Ave.
Edison NJ 08837