User's Manual

In the engraving configuration page can choose the corresponding material, different
materials use different power or speed, the higher the power, the deeper the carving depth, the
slower the speed, the deeper the carving depth, only adjust to the most suitable material carving
parameters, will carve out a good effect.
Finally confirm the adjustment of the focus, confirm the location of the carving, click on the
start of carving, waiting for the end of the carving can enjoy their own carving works. More material
carving works need everyone to explore, according to the different materials, will carve out
different effects of the effect, but also need to set different carving configuration.
There are some wood with grease, so there will be some smoke effect, can try to wipe off, the
effect after wiping depends on the material.