User's Manual

6. Carvingand cutting
This product can be flat, opaque, non-flame-retardant materials of organic materials, such as: wood,
paper jam, bamboo, leather, but also through color paper to cover the surface of glass, ceramics, metal
and other objects, after carving left pattern content and color paper color. also can cut softer sheet
material, such as paper, thin board, EVA sheet material, non-woven fabric, fabric, etc.
This product has built-in G-Sensor sensor, when the product is working, any sloshing, falling, collision,
tilting, rising and falling and other movements will immediately suspend work, can start carving again in
app.
6.1 Engraving parameter settings
Engraving configuration:
After sending the picture, automatically go to the engraving configuration setting page, select the
material option according to the material to be engraved, if there is no suitable option can manuallyslide
the button to adjust the power and speed. The higher the power value, the higher the laser power; the
lower the speed value, the slower the engraving speed, the deeper the engraving depth.