Mini Bluetooth Laser Engraving Machine User's Manual
Ⅰ.Quickunderstanding of products 1.Productdescription This product is asmall desktop laser engraving machine, can be used as a tool in flat, opaque,no added flame retardant material organic materials, for example: wood, paperjam, bamboo, leather, and other materials carved, but also through color papercover glass, ceramics, metal and other objects surface. After carving left the pattern content and color paper color，It can also directly engrave metal. You can also cut a softer sheet.
2.
3. Introduction to Signal Lamp, Power Supply and Data Transmission 3.1 Signal: A red light indicatesthat the power supply is connected, a green light indicates that the device isconnected, and a blue light indicates that the laser is starting to work (aweak spot is emitted when the blue light is not on for adjusting the focus and previewing the engraving position).
3.2：Electricity and datatransmission: Signal light: The red light is on to indicate that the power is connected, the green light is to indicate that the device is connected, and the blue light is on to indicate that the laser is working (when the blue light is off, a weak spot is emitted, which is used to adjust the focus and preview the engraving position).
5.Adjust laser focus: This product needs to adjust the focus manually, in the fuselage inside the laser head under the twisting knob can adjust the focus, this product in the case of power on the blue laser spot shot out, no harm to the human body, adjust the laser focus to achieve the minimum light point carving effect is the best. This product has been out of the factory for carving 1.5 mm planks for focusing, such as carving 1.
Place the carve dobject horizontally under the engraving machine, observe the blue light point, manually adjust the knob below the laser head, and achieve the minimum light point, the engraving effect is the best.
adjusted well, and theremay be a situation where the image can not be engraved. effective engraving rangeof laser focus for this product is between 35 mm-80mm (from laser knobcalculation). can be carved to an object surface below the bottom of this product, or to a surface above the bottom of the product. 6.
iPhone mobile phone users: in the App Store search " Mini laser engraving machine "," laser engraving machine "," laser engraving machine "， download. APP icon: Computer control engraving: connect power - connect computer- Install engraving software (software download address: https://drive.google.
(See APP operation process for details, this productis mainly mobile phone APP operation, there are rich functions to experience. ) Ⅱ . Hardware Introduction 1.
2.
Ⅲ . App Practice Guide and Skills Product Manual https://drive.google.
Product installation package https://drive.google.
1.APP installation Android users: in the Google Play store and other application market search :" Mini laser engraving machine "," laser engraving machine "," laser engraving machine "， appear full name :" Mini laser engraving machine" application is the application of this product. iPhone mobile phone users: in the App Store search " Mini laser engraving machine "," laser engraving machine "," laser engraving machine "， download.
APP icon: 2. Connection Equipment 2.1：Power supply (power supply can be selected DC the power adapter, or 5 V2A of portable battery power supply, with the accessories box inside the Type-C data line inserted on the fuselage of the Type-C power supply interface. If you want tooperate this product with a computer, you can use two Type-C data lines at the same time, one connecting computer, one connecting portable battery.
2.
3. Confirm focus Place the carved object horizontally under the engraving machine, observe the blue light point, manually adjust the knob below the laser head, and achieve the minimum light point, the engraving effect is the best.
4. Get the engraving There are 6 ways for APP to obtain materials: photo album, material library, writing board, shooting, QR code, and barcode (see figure below): 4.1Cellular Album: Click on the album is through the mobile phone album to get the content you want to carve, select the picture can go to the page editing pictures.
4.2 APP Material Library: Click on the material library is to enter the APP own material library to get the content you want to carve, select the picture can go to the page to edit the picture. The 4.
4.4 Photos: Click on the camera to get what you want to carve, such as images, graphics, books, and so on. After taking pictures, you can go to the page where you edit the pictures. material library will update the content on a regular basis, each time after their own work will be automatically saved to the material library, convenient for your next use. 4.
5.Editing Material 5.
5.2 Add text You can add more than one text layer to edit the picture, select the font and zoom in on the text, and you can use an eraser to parts. You can also add multiple text layers, select fonts and zoom in on text, and use an eraser to remove unwanted parts. 5.3 Dimensions and coordinates On the size page, you can set the size of the selected image and precise coordinate positioning.
5.4Edit complete, send Click "Edit Finish, Send" in the upper right corner to the device. The time to send the picture will vary according to the size of the picture. The larger the picture, the longer the time, and the maximum frame size will not exceed 150 seconds. The Android system is faster than the IOS system.
6. Carvingand cutting This product can be flat, opaque, non-flame-retardant materials of organic materials, such as: wood, paper jam, bamboo, leather, but also through color paper to cover the surface of glass, ceramics, metal and other objects, after carving left pattern content and color paper color. also can cut softer sheet material, such as paper, thin board, EVA sheet material, non-woven fabric, fabric, etc.
6.2 Cutting configuration: If the picture in "contour mode" click send, then there will be cutting configuration options, first select the material, cutting power value should be the largest and constant, the slower the cutting deeper. Usually high hardness materials need to reduce the speed of cutting, or after the completion of the cutting click "again" for multiple original path cutting, in order to achieve the purpose of cutting for different materials.
6.
In the engraving configuration page can choose the corresponding material, different materials use different power or speed, the higher the power, the deeper the carving depth, the slower the speed, the deeper the carving depth, only adjust to the most suitable material carving parameters, will carve out a good effect. Finally confirm the adjustment of the focus, confirm the location of the carving, click on the start of carving, waiting for the end of the carving can enjoy their own carving works.
7. Paper engraving For ceramic, purple sand pot, glass, metal products surface carving, can be used to attach color paper, engraving color paper, so that the color on the color paper attached to the surface of the object, because of the material of the color paper, the color carved on the surface of the object will not be easily rubbed off.
8.
IV. Points for attention 1. this product G-Sensor built-in sensor, when the product is working, any sloshing, falling, collision, tilting, rising, falling and other movements willimmediately stop working. 2. this equipment uses the high power laser as the heatemission source, do not use the eye to look directly atthe laser head, althoughhas the G-Sensor device, but direct view at the weak blue light , will hurt the eye. 3.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
