Product Specs

XT-ZB6 User Manual
ShenZhen ThingsTurn Technology Co.,Ltd Copyright@2017-2022
Page 10
Fig.9.2 Solution 2
Fig.9.3 Solution 3
10. Peripheral Design Suggestion
XT-ZB6 module is already integrated into high-speed GPIO and Peripheral interface, which
may be generated the switch noise. If there is a high request for the power consumption and
EMI characteristics, it is suggested to connect a serial 10~100 ohm resistance, which can
suppress overshoot when switching power supply, and can smooth signal. At the same time,
it also can prevent electrostatic discharge (ESD).
11. Product Handling
11.1 Storage Conditions
The products sealed in moisture barrier bags (MBB) should be stored in a non-condensing
atmospheric environment of < 40 °C and /90%RH. The module is rated at the moisture
sensitivity level (MSL) of 3. After unpacking, the module must be soldered within 168 hours
with the factory conditions 25±5 °C and /60%RH. If the above conditions are not met, the
module needs to be baked.
11.2 Electrostatic Discharge (ESD)
• Human body model (HBM): ±2000 V