Product Description

60 mm
折痕 不印刷
80 mm
说明书尺寸：80x60mm
材质：128G铜版纸
折页
BT 11
True Wireless Earbuds with
Bluetooth Speaker BT 11
1. Product Description
2. Technical parameters
Bluetooth speaker side
4. Safety Instructions
To prevent dangerous situations during use,
please read the safety instructions.
3. Function description
Bluetooth earbuds side
Over-distance connection
Up track
Next track
Pause/play
Voice assistant
ANC noise-canceling
Double click “L”ear touch button
Basic
functions
Power on
Power off
Long press the switch button for 3 seconds to turn on
Function
category
Function name Operating
Speaker
functions
Headsets
functions
Phone
functions
Double click “R”ear touch button
Connected to the equivalent device, press the touch button of“L”or “R”ear to play/pause when
playing music
After connecting the mobile phone, three-click the touch button in any mode to start the mobile voice
assistant (siri, etc.)
Long press for two seconds to enter the ANC noies-canceling function
Bluetooth speaker
Touch button
Stainless steel button
PU leather lanyard
Magnetic closure cover
Headsets
Battery indicator
Type-C charging port
Long press the switch button for 3 seconds to turn off
Speaker connected
to Bluetooth
Speaker pause/play
TWS function of Speaker
Call function of speaker
In the state of an incoming call, short press the switch button to answer the call
Turn on the Bluetooth of the mobile phone to search the Bluetooth name “BT11”and connect it success fully
without a password
Connected to the equivalent device, short press the switch button to play/pause when playing music
In the power-on state, press the on/off button twice to pair with TWS, and press twice to disconnect
Headsets connected
to Bluetooth
Turn on the Bluetooth of the mobile phone to search the Bluetooth name “E9-ANC” and connect it success fully
without a password
Headsets power on
Headsets power off
Headsets pairing
Answer call
Hang up call
Refuse call In the incoming call state, long press the “L”or “R”ear for 2 seconds without letting go
1.The "L" and "R" ears are connected about 10 seconds before power on, and it will automatically shut down
after 5 minutes of power on without connection
2.Stay away from the device (within 3 minutes) and then return to the connectable range during calls,
outgoing calls, incoming calls, standby, and listening to music
During a call or outgoing call, double-click the “L” or “R”ear
In the incoming call state, click “L” or “R” ear
Take it out of the charging case, the “L”and “R” ears are automatically paired, and the main ear
enters the pairing state with the mobile phone after the pairing is successful
Be automatically turn on when take it out of charging case or long press the touch button for 3 seconds
(The charging case must have electricity)
Be automatically turn off when put into charging case or long press the touch button for 5 seconds
Bluetooth name of earbuds: E9-ANC
Bluetooth name of speaker: BT11
Working current: 100mA
Bluetooth Version: V5.1
Effective distance: 10 meters
Key type: Button
Speaker specifications: 36 Internal magnetic/3W
Rechargeable battery specification: 3.7V 300mAH
Headsets battery specification: 3.7V 30mAH
Audio range: 100-20Khz
Speaker playing time: 3-4hours Headsets playing time: 24 hours
Support protocol: A2DP1.0, AVRCP1.5, AVDTP1.0, AVCTP1.4,
HFP1.5, GAVDP1.0
Quiescent current: 5UA
SNR: >=85db
Charging port: Type-C
Low voltage reminder: Yes
Input power: 5V 500mA
This product is an half in ear TWS Bluetooth Earbuds+integrated
hanging buckle combination speaker, with compact and lightweight
ergonomic design and built-in low-power high-performance
Bluetooth version 5.1 chip and integrated Bluetooth hanging buckle
speaker charging compartment.
It can adapt to various modes of listening scenes such as sharing
and private.
The compact body supports the luggage buckle lock, which can be
carried with you regardless of outdoor climbing or hiking.
Tips:
1. Put the earphones back into the charging case before use, and when
take out the earbuds again, “L” and “R” earbuds will start pairing
automatically. Or press the touch buttons of the “L” and “R” earbuds for 3
seconds, earbuds will automatically pair after power on.
2. Turn on the Bluetooth of the mobile phone after “L” and “R” earbuds
pairing successfully.
Brief Introduction of TWS Earbuds Function:
1. When the binaural earbuds are taken out of the charging case,
they will automatically complete the pairing with a prompt sound.
2. Then it can be searched and connected by the mobile phone.
3. After the connection is completed, there will be a success tone in
both ears.
4. At this time, it can be realized through the earbud’s touch button
4.1 Click to pause or play music
4.2 Double-click on the left ear to the previous song, and
double-click on the right ear to the next song.
5. Click on the call when you call, double-click the phone while
calling.
6. When put the earbuds back into the charging case, automatically
sleep and start charging, the charging light turn to red and will turn
off after fully charged.
7. Battery indicator consists of 4 Led lights, each light point
represents 25% power.
Long press the power button, the speaker can be searched for
connection after power on, and it will automatically power off after 3
minutes without connection
Brief Introduction of speaker function:
1. Please do not place the product near heaters, microwave ovens,
rice cookers, pressure cookers and other heating equipment to
prevent the product from overeating and causing a fire.
2. Please do not drop or hit the product to avoid explosion.
3. When used by children, please ensure normal operation under
adult supervision.
4. Do not use in a low temperature and humid environment, the
normal use environment is 0-50℃.
5. Do not disassemble or repair the product without authorization.
6. Do not place the product within 20cm of medical equipment to
prevent equipment interference.
7. When not in use, please unplug the product charger from the
socket to avoid consuming the battery life or causing damage.
116mm
33mm
68.5mm
Bluetooth speaker switch