Safety Instructions

Bluetooth speaker side
Function
category
Function name Operating
79mm
This product is an in-ear TWS Bluetooth Earbuds+integrated hanging
buckle combination speaker, with compact and lightweight ergonomic
design and built-in low-power high-performance Bluetooth version 5.3
chip and integrated Bluetooth hanging buckle speaker charging
compartment.
It can adapt to various modes of listening scenes such as sharing and
private.
Pocket size with lanyard design, which is light and easy to carry,
suitable for outdoor climbing, traveling and strolling.
Tips:
1. Put the earbuds back into the charging case before use, and when
take out the earbuds again, “L” and “R” earbuds will start pairing
automatically. Or press the touch buttons of the “L” and “R” earbuds
for 3 seconds separately, they will automatically pair after power on.
2. Turn on the Bluetooth of the mobile phone after “L” and “R”
earbuds
pairing successfully.
Brief Introduction of TWS Earbuds Function:
1. When the binaural earbuds are taken out of the charging case, they
will automatically complete the pairing with a prompt sound.
2. Then it can be searched and connected by the mobile phone.
3. After the connection is completed, there will be a success tone in
both ears.
4. At this time, it can be realized through the earbuds’ touch button.
4.1 Click to pause or playing music.
4.2 Double-click on the “L” ear to the previous song, and double-click
on the “R” ear to the next song.
5. Click to answer the call when there is an incoming call, and click to
end the call when in a call.
6. When put the earbuds back into the charging case, automatically
sleep and start charging, the charging light turn to red and will turn off
after fully charged.
Long press the power switch, the speaker can be searched for
connection after power on, and it will automatically power off after 5
minutes without connection.
Brief Introduction of speaker function:
4. Safety Instructions
To prevent dangerous situations during use, please read the
safety instructions.
1. Please do not place the product near heaters, microwave ovens, rice
cookers, pressure cookers and other heating equipments to prevent the
product from overeating and causing a fire.
2. Please do not drop or hit the product to avoid explosion.
3. When used by children, please ensure normal operation under adult
supervision.
4. Do not use in a low temperature and humid environment, the normal
use environment is 0-50℃.
5. Do not disassemble or repair the product without authorization.
6. Do not place the product within 20cm of medical equipment to
prevent equipment interference.
7. When not in use, please unplug the product charger from the socket
to avoid consuming the battery life or causing damage.
60 mm
折痕 不印刷
80 mm
说明书尺寸：80x60mm
材质：128G铜版纸
折页
BT13
1. Product Description
2.Technical Parameters
3. Function description
Last song
Next song
Pause/play
Earbuds pairing
Voice assistant
Clear pairing
Answer call
Hang up call
Refuse call
Take it out of the charging case, the “L” and “R” ears are automatically paired, and the main ear enters
the pairing state with the mobile phone after the pairing is successful.
After connecting to Bluetooth, three-click the touch button of either side to wake up the voice assistant.
In the state of power on but not connect, 5-click the touch button of either side to clear pairing memories.
Basic
Functions
Speaker power on
Speaker power off
Long press the Power Switch button for 3 seconds to turn on
Speaker
functions
Earbuds
functions
Phone
functions
Media
functions
Other
functions
In the incoming call state, click “L” or “R” ear
During a call or outgoing call, double-click the “L” or “R” ear
In the incoming call state, long press the “L” or “R” ear for 2 seconds without letting go.
1.The “L” and “R” ears are connected about 10 seconds after power on, and it will automatically
shut down after 5 minutes of power on without connection
2.Default main and auxiliary ear randomly after power on
3.During calls, outgoing calls, incoming calls, standby and listening to music, far away from the device
(within 5 minutes) and then return to the connectable range
34mm
Power switch
76mm
Earbuds
Lanyard
Earbuds
Battery indicator
Type-C
charging port
Long press the Power Switch button for 3 seconds to turn off
Speaker connected
to Bluetooth
Speaker pause/play
TWS function of speaker
Turn on the Bluetooth function of the mobile phone to search the Bluetooth name “BT13” and connect
it successfully without a password.
Connected to the equivalent device, short press the Power Switch button to play/pause when
playing music.
In the power-on state, press the Power Switch button twice to start the TWS pairing.
Earbuds connected
to Bluetooth
Earbuds power on
Earbuds power off
Over-distance connection
Double-click the “L” ear for 2 seconds to switch to the last song
Double-click the “R” ear for 2 seconds to switch to the next song
Connected to the equivalent device, press the touch button of “L” or “R” ear to play/pause when
playing music
Be automatically turn off when put it back in charging case.Or long press the Power Switch button for
3 seconds to turn off
Turn on the Bluetooth of the mobile phone to search the Bluetooth name “E8” and connect it
successfully without a password.
Be automatically turn on when open the charging case (The charging case must have electricity)
Bluetooth name of earbuds: E8Bluetooth name of speaker: BT13
Working current: 100mA
Bluetooth version: V5.3
Effective distance: 10 meters
Key type: Button
Speaker specifications: 36 Internal magnetic/3W
Rechargeable battery specification: 3.7V 400mAH
Earbuds battery specification: 3.7V 30mAH
Audio range: 100-20Khz
Speaker playing time: 3-4hours
Quiescent current: 5UA
SNR: ≥85db
Charging port: Type-C
Low voltage reminder: Yes
Recharging current: 5V 300mA
Support protocol: A2DP 1.0、AVRCP1.5、AVDTP1.0、AVCTP1.4、
HFP1.5、GAVDP1.0
Single playing time of earbuds: 4-5 hours
True Wireless Earbuds with
Bluetooth Speaker 2 in 1
79mm
60 mm
折痕 不印刷
80 mm
说明书尺寸：80x60mm
材质：128G铜版纸
折页
BT13
1.产品描述
2.技术参数
音箱蓝牙名称：BT13
工作电流：100mA
蓝牙版本 ：V5.3
有效距离 ：10米
按键类型 ：按键
音箱喇叭规格 ：36内磁/3W
充电仓电池规格 ：3.7V 400mAH
耳机电池规格 ：3.7V 30mAH
音频范围 ：100~20KHz
音箱播放时间：3-4小时 单次耳机播放时间：4-5小时
支持协议 ：A2DP 1.0、AVRCP 1.5、AVDTP 1.0、
AVCTP 1.4、HFP 1.5、GAVDP 1.0
本品为半入耳式TWS蓝牙耳机+一体化挂扣组合音箱, 小
巧轻便的人体工程学外观设计并内置低功耗高性能蓝牙5.3
版本芯片再配一体化蓝牙挂扣音箱充电仓。
可适应分享与私人等各种模式的听声场景。
小巧机身附有挂绳设计，轻便易携，适合户外攀登，
旅行漫步等。
蓝牙音箱面
4.安全须知
为防止使用过程中出现危险情况,请阅读该安全须知。
1. 请不要把产品放置在加热器，微波炉，电饭煲，高压
锅等加热设备附近，防止造成产品过热并引发火灾。
2. 请不要摔跌、撞击产品, 避免产品出现爆炸情况。
3. 儿童使用时, 请在成人监护下确保正常操作。
4. 请勿在低温潮湿的环境下使用, 正常使用环境0-50℃。
5. 请勿擅自拆卸, 维修产品。
6. 请勿把产品放在离医疗设备20cm以内的范围, 防止
出现设备干扰现象。
7. 在不使用的情况下, 请把产品充电器从插座上拔除,
避免消耗电池使用寿命或造成损坏。
3.功能说明
音箱功能简要：
长按开关机键，开机之后音箱即可被搜索连接，
无连接状态下等待5分钟后自动关机。
TWS耳机功能简要：
1. 当双耳耳机取出充电仓后，自动完成配对并伴随提示音。
2. 随后即可被手机搜索连接。
3. 完成连接后，双耳伴有成功提示音。
4. 此时可通过耳机触摸按键实现：
4.1 单击暂停或播放音乐。
4.2 双击右耳下一曲，双击左耳上一曲。
5. 来电时单击接听电话，通话时双击挂断电话。
6. 当耳机放回充电仓后耳机自动休眠并进入充电状态，
此时充电灯为红色，充满后熄灭。
蓝牙耳机面
上一曲
下一曲
暂停/播放
左右耳机配对
语音助手
清除配对
接听电话
挂断电话
来电拒接
从充电盒里拿起来左右耳自动配对，配对成功主耳进入跟手机配对状态
连接蓝牙后任意一边连击三下唤醒语音助手
无连接蓝牙，任意连击五下清除配对
基本功能
音箱开机
音箱关机
长按3秒开/关机键开机
功能类别 功能名称 操作方式
音箱功能
耳机功能
电话功能
媒体功能
其他功能
在来电状态下，单击左耳或右耳
在通话中或去电中，双击左耳或者右耳
在来电状态下，长按左耳或右耳 2 秒不松手
1.开机后 10 秒主副耳回连，开机 5 分钟后自动关机
2.开机后随机默认主副机
3.通话、去电、来电、待机、听音乐期间远离，设备（5 分钟内）回到可连接范围
温馨提示：
1. 使用前先把耳机放回充电仓，再次取出左右耳耳机后，
左右耳耳机会自动配对；或者左右耳分别按触摸键3秒，
开机后，自动配对。
2. 左右耳配对完成后再打开手机蓝牙。
34mm
开关按钮
76mm
耳机
挂绳
充电舱
电量显示灯
Type-c充电口
长按3秒开/关机键关机
音箱连接蓝牙
音箱暂停/播放
音箱TWS功能
打开手机蓝牙功能，搜索蓝牙，连接蓝牙名BT13无需密码即可连接成功
已连接对等设备，在播放音乐的时候短按开/关机键进行播放暂停
在开机的状态下，按两下开/关机键进行TWS配对
耳机连接蓝牙
耳机开机
耳机关机
超距离回连
双击左耳 2 秒 切换到上一曲
双击右耳 2 秒切换到下一曲
已连接对等设备，在播放音乐的时候单击左或右耳播放暂停
放回有电的充电盒盖上充电仓关机或长按3秒关机
打开手机蓝牙功能，搜索蓝牙，连接蓝牙名E8无需密码即可连接成功
打开充电仓自动开机（充电盒必须有电）
耳机蓝牙名称：E8
静态电流 ：5UA
信 噪 比 ：≥85db
充电接口方式 ：Type-C
低电压提醒 ：有
充电电流：5V 300mA
真无线耳机
蓝牙音箱二合一
Bluetooth earbuds side