Product Description

60 mm
折痕 不印刷
80 mm
说明书尺寸：80x60mm
材质：128G铜版纸
折页
BT02
True Wireless Earbuds with
Bluetooth Speaker 2 in 1
1. Product Description
2. Technical parameters
Bluetooth speaker side
4. Safety Instructions
To prevent dangerous situations during use,
please read the safety instructions.
3. Function description
Bluetooth earbuds side
Over-distance connection
Up track
Next track
Pause/play
Clear pairing
Double click “L”ear touch button
Basic
functions
Power on
Power off
Long press the switch button for 3 seconds to turn on
Function
category
Function name Operating
Speaker
functions
Earbuds
functions
Phone
function
Double click “R”ear touch button
Connected to the equivalent device, press the touch button of“L”or “R”ear to play/pause when
playing music
In the state of power on but not connect, 5-click the touch button to start
Long press the switch button for 3 seconds to turn off
Speaker connected
to Bluetooth
Speaker pause/play
TWS function of Speaker
Call function of speaker
In the state of an incoming call, short press the switch button to answer the call
Turn on the Bluetooth of the mobile phone to search the Bluetooth name “BT02”and connect it success fully
without a password
Connected to the equivalent device, short press the switch button to play/pause when playing music
In the power-on state, press the on/off button twice to pair with TWS, and press twice to disconnect
Earbuds connected
to Bluetooth
Turn on the Bluetooth of the mobile phone to search the Bluetooth name “E3”and connect it success fully
without a password
Earbuds power on
Earbuds power off
Earbuds pairing
Answer call
Hang up call
Refuse call In the incoming call state, long press the “L”or “R”ear for 2 seconds without letting go
1.The "L" and "R" ears are connected about 10 seconds after power on, and it will automatically shut down
after 3 minutes of power on without connection
2.Stay away from the device (within 3 minutes) and then return to the connectable range during calls,
outgoing calls, incoming calls, standby, and listening to music
During a call or outgoing call, double-click the “L” or “R”ear
In the incoming call state, click “L” or “R” ear
Take it out of the charging case, the “L”and “R” ears are automatically paired, and the main ear
enters the pairing state with the mobile phone after the pairing is successful
Be automatically turn on when take it out of charging case or long press the touch button for 3 seconds
(The charging case must have electricity)
Be automatically turn off when put into charging case or long press the touch button for 3 seconds
Bluetooth name of earbuds: E3
Bluetooth name of speaker: BT02
Working current: 100mA
Bluetooth version: V5.3
Effective distance: 10 meters
Key type: Button
Speaker specifications: 36 external magnetism/2W
Charging case battery specification: 3.7V 300mAH
Earbuds battery specification: 3.7V 30mAH
Audio range: 20Hz－20KHz
Speaker playing time: 2-3hours
Quiescent current: 5UA
SNR: ≥85db
Charging port: Type-C
Low voltage reminder: Yes
Recharging current: 5V 200mA
This product is a semi-in-ear TWS Bluetooth headset + integrated
hanging buckle combination speaker, compact and lightweight
ergonomic design, and built-in low-power high-performance
Bluetooth 5.3 version chip, and an integrated Bluetooth lanyard
speaker charging case. It can adapt to various listening scenarios
such as sharing and private. The compact body supports luggage
locks, so you can take it with you whether you are climbing or
hiking outdoors.
Tips:
1. Put the earbuds back into the charging case before use, and when take
out the earbuds again, “L” and “R” earbuds will start pairing automatically.
Or press the touch buttons of the “L” and “R” earbuds for 3 seconds,
earbuds will automatically pair after power on.
2.Turn on the Bluetooth of the mobile phone after “L” and “R” earbuds
pairing successfully.
Brief Introduction of TWS Earbuds Function:
1. When the double headsets are taken out of the charging case,
they will automatically complete the pairing with a prompt sound.
2. Then it can be searched and connected by the mobile phone.
3. After the connection is completed, there will be a success tone in
both ears.
4. At this time, it can be realized through the earbuds touch button:
4.1 Click to pause or play music.
4.2 Double-click on the left ear to the previous song, and
double-click on the right ear to the next song.
5. Click to answer the call when there is an incoming call, and
double click to end the call when in a call.
6. When put the earbuds back into the charging case, automatically
sleep and start charging, the charging light turn to red and will turn
off after fully charged.
Long press the power button 3 seconds, the speaker can be
searched for connection after power on, and it will automatically
power off after 5 minutes without connection.
Brief Introduction of speaker function:
1. Please do not place the product near heaters, microwave ovens,
rice cookers, pressure cookers and other heating equipment to
prevent the product from overeating and causing a fire.
2. Please do not drop or hit the product to avoid explosion.
3. When used by children, please ensure normal operation under
adult supervision.
4. Do not use in a low temperature and humid environment, the
normal use environment is 0-50℃.
5. Do not disassemble or repair the product without authorization.
6. Do not place the product within 20cm of medical equipment to
prevent equipment interference.
7. When not in use, please unplug the product charger from the
socket to avoid consuming the battery life or causing damage.
Support protocol: A2DP1.0, AVRCP1.5, AVDTP1.0, AVCTP1.4,
HFP1.5, GAVDP1.0
Earbuds playing time: 4 hours
PU Lanyard
headset
Speaker
Rotating open lid
Rotating open lid
83mm
59.66mm
PU Lanyard
Switch
Type-charging port
31.23mm
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.