User's Manual

2. Switch to "ON", it will prompts "pairing" after 5 seconds, and then Red and
Blue lights flashing alternately when headset is on and ready for pairing.
3. Turn on “Bluetooth” in setting and find headset name S801.
4. Click S801, Bluetooth headset gets connected with your mobile phone
automatically. Some may require pass code which is 0000.
Pair the headset with 2 mobile phones
1. After successfully paired with a mobile phone, close the Bluetooth function
of the mobile phone, and switch the button of S801 to OFF.
2. Same procedure to get the 2nd mobile phone paired with the Bluetooth headset.
3.Turn on the Bluetooth function of the 1st mobile phone; choose“S801”
to finish the pairing status with the 2nd mobile phones.
Note：
1. With you previously paired device’s Bluetooth turned on and in range ,
turn on S801.The headset will automatically reconnect to the same Bluetooth
device that connected last time.If you have a previously paired device that does
not auto-reconnect , navigate to the Bluetooth settings menu on your device,
turn on the Bluetooth feature, and select “S801” from your list of
paired Bluetooth devices .
2. Pairing time exceeds 3 minutes, S801 will automatically shutdown ; in 3
minutes back to the effective distance can automatically return to the last
connected device .
3. P.S.: If connected with two moblie phones, only mobile phone 1 supports
wireless music and you can start conversation for both mobile phones. Battery
check up through iPhone.
Answer & End call / lncoming call vibration remind
Answer phone call:
When there is incoming call, there will be a voice prompt,134......2578.
(phone number will be broadcasted)
Click MFB to answer, or just operate your mobile phone.
End Call：
Press the multifunction button to hang up calls, or by direct hang up your
phone call.