Instruction Manual
Table Of Contents
- 1. Functional considerations
- 2. Action diagram
- 3. APP download:Scan the QR code on the package and instructions, download the exclusive APP and register
- 5.Instructions
- 6. APP control mode
- 7. Voice control mode
- 8. Gesture mode
- 9. Bracelet control mode
- 10. Technical parameters
- 13. Statement: the information of this product may be changed without prior notice
7.
Voice control mode
Turn on the robot dog and call Billy twice to
wake up the robot dog. The dog will bark twice
in response to the blue standby status of the
eye light. Then you can say the command in t
he entry, the entry is as follows:
Sit down!
Stand up!
Lie down!
Say hello!
Shake head!
Yoga, Push up!
Dance for me!
What can you do!
You are so cute!
When you say the word in the above entry, the
robot dog will do the corresponding action.
8.
Gesture mode
8.1.
Billy is equipped with a variety of sensors,
you can touch different parts of his body (such
as the forehead,the back of his head, buttocks),
it will have a variety of reactions, if you do not
friendly push it, kick it, it will be angry(eyes LED
light shows red) to protest.
8.2Gesture bluetooth function (put your hand in
front of the nose of the robot dog and swing it
about 5cm, and the dog will make the
movement of shaking his head and sitting down)
9.
Bracelet control mode
Billy-Introduction to bracelet functions
9.1.
Before using the bracelet mode, please
wear the bracelet in your left hand and point
upwards to disconnect the Bluetooth
connection of the phone.At this time, press
and hold the click button on the bracelet to
connect to Billy quickly. At this time, the
status of the bracelet is green, you only
need to move back and forth.
9.2.
Click the "switch" button, and you can
switch to follow mode. Within 2 meters from
Billy, the indicator light of the bracelet will turn
blue and always light. At this time, Billy's eyes
are in a blue flashing state, which indicates
that Billy will follow you at any time.(note: in
the following mode, please make sure that
the bracelet can be seen by Billy, and it should
not be covered by clothes or body, or the
following mode will fail)
9.3.
If the switch button is clicked again, the
indicator light of the bracelet will turn green
and turn on normally, and Billy's eyes will
also turn green and turn on normally. At this
time, it will return to the state of gesture control.
9.4.
Long press thumb up button for more than
3 seconds and the indicator light of the bracelet
will go off. At this time, the bracelet will
disconnect from Billy and enter a dormant state.
If you want to use it again, please press thumb
up to wake up the connection.
9.5.
Control method: long press the switch
button for more than 3 seconds and the
indicator light turns green. Turn off the
connected machine dog and open another
machine dog. Restart the bracelet and connect.
9.6.
Please note: when selecting bracelet
control or mobile APP control, only one of
them can be selected, and the other device
must be in hibernation or bluetooth
disconnected state.
Adjustable
strap
Charging
hole
Button
Indicator
light