Users Manual

Features
1. MIC: 1/8 inch microphone input.Plug in a wired microphone to be mixed with the
audio being transmitted.
2. CHANNEL: This button changes the transmitter channel is using. Press to toggle
between channel 1, 2, 3, etc. The LED display will show the currently selected
channel. Notes: When more than two transmitters are working
simultaneously, make sure each transmitter on a different channel.
3.
OFF-LO-HI: This switch toggles the transmitter on and selects the power level at
which it transmits.Switch to LO for low power mode. Transmission distance will be
roughly 100 feet. When using the internal battery, the system will always transmit
in low power mode.
4. POWER: The light will illuminate green when it is charging, and red when it is
on.Switch to HI for high power mode. Transmission distance will be roughly 1000
feet. Note: High power transmission mode is only available when the transmitter
is plugged in with the DC 9V adapter.
5.
ANTENNA: The antenna attaches here using the BNC connector.
6.
RCA R+L Input: Connect your mixer or audio device to the Left and Right RCA
input.
7. USB Factory Service: DO NOT use this connection to charge/power the device.
This connection is used to update the device.
8.
DC-9V: Connect the power adapter here to power the unit and charge the
internal battery. While the transmitter is plugged in, it can be operated in high
power mode.
3 | Page