User's Manual

Operations:
 Avoid direct sunlight on the monitor and keep it away from the stove or other heat sources.
 Remove any objects that may fall into the ventilation holes or hinder the heat dissipation of
the display electronics.
 Do not block the ventilation holes on the machine.
 When placing the monitor, make sure that the power plug and socket are easy to use.
 When the monitor is switched off by unplugging the power cord, wait for 6 seconds before
plugging in the power cord again for normal operation.
 During operation, do not subject the monitor to any excessive vibration or strong impact.
 Do not knock or drop the monitor during operation or transportation.
There is a risk of explosion if you are replacing with the wrong battery type, please dispose of the
used battery according to the manufacturer's instructions.
Maintain:
 To prevent possible damage to your monitor, do not apply excessive pressure on the LCD
panel. When moving the monitor, please hold the frame tightly; do not put your hand or
fingers on the LCD panel to lift the monitor.
 If you are not going to use the monitor for a long time, please unplug it.
 If you need to use a slightly damp cloth to clean the monitor, please unplug it first. Use a dry
cloth to wipe the screen only after the power is turned off, however, please avoid using
organic solvents such as alcohol or amino-based liquids to clean the monitor.
 To avoid electric shock and prevent permanent damage to the product, please do not place
this product in dusty, rainy, water, or excessively humid environments.
 If your monitor gets wet, please wipe it with a dry cloth immediately.
 If there are foreign materials or water in the monitor, please turn off the power immediately
and unplug the power line. Then remove foreign materials or water, then send the machine to
the maintenance center.
 Do not store or use the monitor in a location exposed to heat, direct sunlight or extreme cold.
 In order to maintain the best performance of the monitor and ensure a longer service life, it is
strongly recommended to use the monitor at a location within the following temperature and
humidity ranges.