User's Manual
Table Of Contents
- I Product interface
- II Product Functions
- III Working environment
- IV Feasibility test
- V Parameter：
- VI Packing list
- VII Environmental Protection and ROHS
Signal source access:
1. Automatic jump: Access the signal source, it’ll automatically jump to the
corresponding channel.
2. Pop-up prompts: Access the signal source, a pop-up appears asking whether
to jump to the source channel.
Channel name: Customize the channel name. After changing the name,
the corresponding channel name of the whole system will be modified
synchronously.
Automatic awake: Turn on automatic awake. When the device is in the
sleep, connect HDMI or VGA can automatically awake the equipment.
3.3.3 HDCP
Turn on/off HDCP
3.3.4 USB Disable
Turn on the USB Disable. Lock the USB port. When plug in the USB flash
drive, need to enter the password to open the USB flash drive.