User's Manual

Something not sound right?No sound at all?
Microphone not working?
Try to move to the microphone closer to the location of the
bluetooth device connected.When the headset located close
to connect bluetooth device range (barrier-free or interference
farthest 8 meters) inside,On the headset electricity/wireless
connection status indicator should show stable green light.
Adjust the volume and microphone settings to an audible level
in both your application and operating systen/Bluetooth device.
Try using the headphones with another computer.
Headphones not working with acomputer?
If the headphones don't work and you're using a computer,
you may need to specify the headphones as the default audio
output/input device for your operating system.
Decide whether computers for bluetooth device or external USB
bluetooth equipment;
Such as: computer external USB bluetooth adapter.
Windows®XP
1.Go to Start/Control Panel/Sounds and Audio devices/Audio tab.
2.In the Sound Playback/Default Device window, choose the
Wireless Headphones.
3.Select the Voice tab.
4.In the Voice tab,choose the Wireless
Headphones.
5.Click ok.
6.Restart your media application.
Windows®Vista and Windows®7
1.Go to Start/Control Panel/Sounds/Playback Devices tab.
2.Choose Playback Devices.
3.Choose the Wireless Headphones.
4.Click Set Default,and then click OK.
5.Select the Recording Tab.
6.Choose the Wireless Headphones.
7.Click Set Default,and then click OK.
8.Restart yout media application.
•
•
•
•
•
Bluetooth AV Audio
Bluetooth AV Audio
Bluetooth AV Audio
Bluetooth AV Audio
TROUBLESHOOTING
TROUBLESHOOTING
BH2100H
BLUETOOTH HEADPHONES
Mac® OS
1.Open System Preferences.
2.Click on the Sound icon.
3.Click on the Output tab.
4.Choose the luckee phone Wireless Headphones.
5.Select the Lnput tab.
6.Choose the luckee phone Wireless Headphones.
7.Close window.
8.Restart your media application.
Headphones not charging?
Use the provided USB charging cable,connect the cable to
the charging port on the headphones,Connect the other end ot
the cable to a USB port on your computer(or to an optional USB
charger).
If you are using a USB hub, connect the charging cable directly
to a USB port on your computer.
If on the headset electricity/wireless connection instruction set
is not purple lights (stable or flashing blue light),
That is no headphones from the computer USB port receiving
power. Please try to use a computer on the other
USB port, and then open the computer or wake up, the headset
to charge.
exit and restart the media application.
try on another computer is to use the earphone.
Music controls not working?
Music controls for applications other than iTunes,QQ Music and
Windows Media Player® are
not supported.
Bluetooth not connecting?
Try moving the headphones closer to your Bluetooth device.The
Battery/wireless status light on the headphones turns solid blue
when the headphones are in range (up to 8m)with the Bluetooth
device.
•
•
•
•
•
•
•
TROUBLESHOOTING
SAFETY INFORMATION
Read and follow these instructions,heed all warnings.and keep
this document for future re ference.
Do not use your product near water,including dripping or splashing
sources(e.g.,indoor fountains),or near objects filled with liquids,
such as flower vases or fish tanks.
Do not use your product near water(e.g.,radiators,heat registers,
stoves,open flames,such as lighted candles,or other heat-producing
devices,such as audio amplifiers or Tvs.)
Refer all servicing and repair to qualified service personnel.
Please use the appropriate music volume so as not to damage your
hearing and sound system.your hearing and sound system.
Your product is suitable for use in semi-tropical and moderate
climates only.
•
•
•
•
•
•
•
•
•
Try powering off the headphone,and then power it back on
by pressing the Multi-function button.
Make sure the headphones are selected as the active output audio
device on your Bluetooth device.
Re-establish pairing between the headphones and your Bluetooth
device.For more informatioN,refer to First Bluetooth pairing and
Additional Bluetooth pairings in this guide.
Try using the headphones with a different Bluetooth device.
Please read carefully before use
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved
by the part responsible for compliance could void the user's authority
to operate the equipment.
SAFETY INFORMATION