Instruction Manual

2 3 4 51
Before You Begin... Getting Started
Questions & Customer Support
For any issues concerning this product, please visit our website
at SouthernTelecom.com and click on Product Support or call
at [phone] (Mon-Fri, 8am-10pm EST).
Caution
• READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE
• THIS IS NOT A TOY, please keep away from children
• Do NOT submerge in water
• Keep away from extreme heat and/or humidity
• Do not open this product or attempt to repair the unit yourself should
it not be working.
• Low power may cause poor Bluetooth connection or sound distortion
• Only power this device with its suppiled power adapter
In the Box
• WST3760 - Wireless Soundbar (x1)
• Wireless Subwoofer (x1)
• Power Adapter (x2)
• AUX-RCA Audio Cable (x1)
• Instruction Manual (x1)
Location of Controls
[ ] | [ ] Buttons
(Press +Hold) Skip Tracks
(Press) Adjust Volume
[ ] Button
(Press +Hold) Disconnect
Bluetooth pairing
(Press) Change input
mode (BT, AUX)
[ ] Button
(Press +Hold) Power
Soundbar ON/OFF
(Press) Pause/resume
playback
DC Power
Input
3.5 mm Auxiliary
Audio Input
Playing Music
To enjoy music on your speaker, make sure that the speaker is properly
paired to your Bluetooth-enabled device or connected via the 3.5 mm
auxiliary input jack.
While playing music the subwoofer’s LED indicator will turn solid BLUE,
the soundbar’s LED indicator will flash BLUE.
Controlling Playback & Volume (Bluetooth Only)
• Press the [ ] button to pause/resume media playback.
• Press the [ ] and [ ] buttons to skip tracks.
• Press and hold the [ ] and [ ] buttons to adjust volume.
• Press and hold the [ ] button to
disconnect any Bluetooth pairing.
Using the Remote Control
• [ ] Button: Enter/leave standby mode
• [ ] Button: Change input mode
• [ ] Button: Mute/unmute volume
• [ ] Button: Skip to previous track
• [ ] Button: Pause/resume playback
• [ ] Button: Skip to next track
• [ ] Button: Decrease volume
• [ ] Button: Reset to default volume
• [ ] Button: Increase volume
Wall Mounting the Soundbar
1. Remove the speaker and its contents from packaging.
2. Using a pencil, mark two spots on a wall measuring 34.7 inches apart.
3. If installing to a wooden surface, drive or drill a mounting screw into the
wall at each marked location. If installing to drywall or a brick surface, you
may need to install plastic anchors to properly secure the mounting
screws.
4. Place and hang the speaker from its mounting holes on the back onto
the installed mounting screws.
Powering ON/OFF
• After plugging in the adapter, the LED indicator on the front of the speaker
will turn RED indicating that the speaker can be powered ON.
• Press and hold the [ ] button on the speaker to power ON. A tone will
be heard and the speaker will automatically enter Bluetooth pairing mode.
The speaker will automatically re-pair to any nearby, previously-paired
devices that have Bluetooth enabled.
• Press and hold the [ ] button again to power OFF.
Changing Input Modes
• Press the [ ] button to change between Bluetooth mode and 3.5 mm
AUX, audio inputs.
Note: When plugging in a 3.5 mm to the speaker, the speaker will auto-
matically switch to AUX mode.
Bluetooth Pairing
1. Power the speaker ON. A tone will be
heard and the LED indicator will quickly
ash BLUE.
2. Set your mobile device to search for
Bluetooth devices. When it appears,
select WST3760 from the list of found
devices.
3. After a successful pairing, a tone will
be heard and the LED indicator will turn solid BLUE.
Using the 3.5 mm AUX Input
To use the speaker as a wired device, insert the 3.5 mm connector of the
supplied AUX cable into the 3.5 mm auxiliary audio input jack. Insert the
RCA connectors into the audio outputs of your media-playing device.
Note: Typically, RCA connectors are color-coded with Red being for the
right audio channel and white being for the left audio channel.
The LED indicator will turn GREEN when the AUX input is in use. While
connected, playback is controlled via the connected device. Volume can
be controlled with the speaker, remote control or the connected device.
Powering the Soundbar and Subwoofer
Insert the pin of one of the supplied power adapters into the DC power
input on the side of the soundbar. Plug the adapter into an electrical outlet.
Insert the pin of the other supplied power adapter into the DC power
input on the back of the subwoofer. Plug the adapter into a an electrical
outlet.
Speaker is ready
to pair
34.7 inches
Slide the [Power] switch on the back of the subwoofer to the ON position.
When powered on the subwoofer and soundbar will automatically connect
to each other.
[Power] Switch
Power Subwoofer
ON/OFF
(Subwoofer-
Back Panel)
DC Power
Input
(Soundbar-
Side Panel)
LED
Indicator