Product Specs
Table Of Contents
- D12113-Alexa 44-Key Direct Connection Music Contro
- Product Specification
- Revision history
- 1 Purpose
- 2 Scope
- 3 Terms and Definitions
- 4 Product overview and pictures
- 5 Specific Function Definition
- 6 How does the device connect to Echo speaker?
- 7 Alexa APP operation instruction
- 8 device control via voice assistant
- 9 Remote control key instruction
- 10 Cautions
深 圳 天 好 光 电 有 限 公 司
SHENZHEN DAYBETTER OPTO-ELECTRONICS CO.,LTD ★秘
密★
16
device is re-paired with Echo, the original device is not automatically deleted on Alexa APP. It needs to
be manually deleted on APP.
Remind users that if they want to change their Alexa account, they need to unbind the device on the old
Alexa APP account first, and then log in to the new Alexa account. Otherwise the connection between
the speaker and the new device will be invalid, and the device needs to be rewired with the network.
The method of unbundling can be found in the pdf.
Remind users that as the Echo software continues to be updated, the software of the device is also
continuously upgraded. If you encounter problems, please contact customer service.
The 1st generation Echo does not support direct connection. It is available from the 2nd generation.
The success rate of group control will be low when the number of devices connected to Echo is too
many. For example, a voice command is about to set 6 lights to red, then the probability of success at
once is very low. This is the limitation of Echo's control mechanism. This prompts the user to try 1 or 2
more times. If it is an on/off light operation (not a color or brightness adjustment), the success rate of
successfully operating multiple devices with a single voice is high.
If the user is unsuccessful in pairing, try to pair the device next to the Echo first, because relatively far
distance will affect the success rate of wiring. After the network is completed, you can move the device
and put it within the effective distance of Bluetooth.
Some devices may have been connected to Echo before. that is, there is a network record, then you must
enter the network configuration state to connect to the new Echo speaker. So it is necessary to let the
user press the remote control to enter the network configuration state, and new device cannot be
considered in the network configuration state once the power is on. This can be confirmed by the
flashing light status.
The wall penetration effect can not guarantee, because the thickness and material of the wall of each
user's home is difficult to determine, it is not recommended to promise the user through the wall effect.
We have a test through a 30 cm thick brick wall with no problem.