Product Specs
Table Of Contents
- FEATURESAPPLICATIONS
- GENERAL DESCRIPTION
- QUICK REFERENCE DATA
- PIN FUNCTIONS
- ELECTRICAL SPECIFICATIONS
- Package marking:
- Absolute Maximum Ratings
- Temperatures
- ATTENTION!
- Glossary of Terms
- FUNCTIONAL DESCRIPTION
- Pin functions in the different modes of nRF24L01
- Standby Modes
- Power Down Mode
- Packet Handling Methods
- ShockBurst™
- Enhanced ShockBurst™
- Enhanced ShockBurst™ Transmitting Payload:
- Enhanced ShockBurstTM Receive Payload:
- DEVICE CONFIGURATION
- SPI Interface
- SPI Instruction Set
- Interrupt
- SPI Timing
- Memory Map
- Configuration for compatibility with nRF24XX
- PACKET DESCRIPTION
- IMPORTANT TIMING DATA
- nRF24L01 Timing Information
- Enhanced ShockBurst™ timing
- PERIPHERAL RF INFORMATION
- Output Power adjustment
- Crystal Specification
- nRF24L01 sharing crystal with a micro controller.
- Crystal parameters:
- Input crystal amplitude & Current consumption
- PCB layout and de-coupling guidelines
- APPLICATION EXAMPLE
- DEFINITIONS
- LIFE SUPPORT APPLICATIONS
- YOUR NOTES
- 空白页面
- 空白页面
- 空白页面
- 空白页面
PRELIMINARY PRODUCT SPECIFICATION
nRF24L01 Single Chip 2.4 GHz Radio Transceiver
Nordic Semiconductor ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989
Page 12 of 38
Revision: 1.1
November 2005
Figure 4: nRF24L01 in a star network configuration
An nRF24L01 configured as primary RX (PRX) will be able to receive data trough 6
different data pipes, see Figure 4. A data pipe will have a unique address but share the
same frequency channel. This means that up to 6 different nRF24L01 configured as
primary TX (PTX) can communicate with one nRF24L01 configured as PRX, and the
nRF24L01 configured as PRX will be able to distinguish between them. Data pipe 0
has a unique 40 bit configurable address. Each of data pipe 1-5 has an 8 bit unique
address and shares the 32 most significant address bits. All data pipes can perform full
Enhanced ShockBurst™ functionality.
nRF24L01 will use the data pipe address when acknowledging a received packet. This
means that nRF24L01 will transmit ACK with the same address as it receives payload
at. In the PTX device data pipe 0 is used to received the acknowledge, and therefore
the receive address for data pipe 0 has to be equal to the transmit address to be able to
receive the acknowledge. See Figure 5 for addressing example.
TX3
TX4
TX2
TX5
TX1
TX6
RX
Frequency Channel N