Instruction Manual

8
2) Press key to confirm.
3) The user will be prompted to enter the PIN code, the display shows PIN?, then press numerical keys to
input code (default as 0000).
4) Press
key to confirm. If the PIN code is validated all base settings will be returned to the factory
default.
Handset Menu function 4: HS SETTINGS
The user is able to change a number of the settings for the handset to their own individual preferences. Press
key and use ∧ or ∨ key to select HS SETTINGS. Then you can do below:
 ALARM
The user can set the alarm on the handset and adjust the alarm settings, to give an alert at a programmed
time of every day.
1) Press
key, the first sub-menu is ALARM item.
2) Press
key to confirm.
3) Press ∧ or ∨ key to select ON or OFF, press
key to confirm. Selection of OFF will turn the alarm off,
and the user is dropped back to the ALARM menu surface, selection of ON option will turn the alarm on,
then the user will be requested to set the alarm time.
4) After select ON, press
key to start the time settings of alarm, “12-00” displayed with “12” is blinking.
5) Press ∧ or ∨ key to change the hours, press
key to confirm, use the same method to select
minutes.
6) After select the alarm time, press
key, the user will be presented with a further option to select to ON
or OFF to enable or disable the snooze function on the alarm.
7) Press
key to confirm your selection.
8) When the alarm is set, the
will appear on the top of the display
 Startup alarm:
In idle state, the alarm will ring at very sharp time you have set.
 Intermit alarm:
During the alarming, you can switch it off by pressing any key of the handset, or when a call comes, the
alarm will be intermitted too.
 Close alarm:
Re-enter the alarm setting menu option and select OFF.
Notes:
1) If the SNOOZE is set ON, the alarm will be repeated about every 5 minutes for about nine times, with the
alarm icon continuing to flash. During the alarming, press any key except
key to intermit alarming,
and will begin to ring after 5 minutes.
2) If the SNOOZE is set OFF, the alarm will sound for 45 seconds once.
 RING SETUP
The user is able to change the handset ringing on internal calls and external calls. There are 10 ringer
melodies and 5 different volume levels can be set.
1) Press
key, then using ∧ or ∨ key to select RING SETUP item.
2) Press
key to enter.
3) Press ∧ or ∨ key to select the INT RING and EXT RING setup.