Instruction Manual

5
BS SETTINGS
DELETE HS
DIAL MODE TONE
PULSE
FLASH TIME 100/300/600/1000MS
MODIFY PIN default 0000
BS DEFAULT default 0000
HS SETTINGS
ALARM ON
OFF
RING SETUP INT RING
EXT RING
TONE SETUP KEY TONE
BATTERY LO
W
RANGE ALARM
LANGUAGE
HS NAME
AUTO ANSWER ON
OFF
BARRING default 0000
DATE&TIME
CONTRAST
SELECT BASE BASE 1
,
2
,
3
,
4 and AUTO
HS DEFAULT default 0000
REGISTRATION BASE 1
(
2
,
3
,
4
)
Handset Menu function 1: CALL LOG
Press key, use ∧ or ∨ key to choose CALL LOG, press key to enter. And there are three items in
this menu, MISSED, RECEIVED and DIALED.
In CALL LOG
1) Press
key to enter missed call lists, received call lists or dialed call lists.
2) The LCD will show the last record. (If no entries are available in the list, the LCD will be shown EMPTY).
3) Press ∧ or ∨ key to view other record. press 0 key to check the record time
4) When the desired number is show, press the
or key to dial out the number automatically.
When the record is show, press
key, use ∧ or ∨ key to choose, press key to confirm.
1) ADD TO PB : this function allows the user to add an entry from the caller list to the phone book.
2) DELETE : this function allows the user to delete the currently selected entry from caller list
3) DELETE ALL : this function allows the user to delete all numbers
Note: In idle state, press ∧ key once to outgoing records or press ∨ key to review incoming records.
Handset Menu function 2: PHONE BOOK
Each individual Handset has its own phonebook, independent of each other handset, with a maximum of 50
entries, each name a maximum of 12 characters, each number a maximum of 20 digits and a melody
selected from 1 to 10.
Press
key. Use ∧ or ∨ key to select PHONE BOOK. Then press key to confirm.
 LIST
LCD display LIST. The function allows the user to review the phone book record lists by using the ∧ or ∨
key. Press 0 key to see the name/number
When the desired number is show, press the
or key to dial out the number automatically.
Shortcut: In the idle mode, press key to enter phone book list conveniently. Press 0 key to see the