Instruction Manual

13
Three-way conference call
1) When a call comes, Press (HS1)
or key
2) Then press (HS1)
key once. The destination handset will ring.
3) Press (HS2)
or key to accept call.
4) Press (HS1) then the
key then you can talk all together.
5) Press
to quit the three-way conference mode, then other parties can also continue to
communication.
If you have more than two handsets registered with one base, operation it by the follow ways:
Intercom
The intercom feature is activated by pressing the
key.
1) In idle mode, press
key once.
2) The user will be prompted to select the number of the internal handset with which you wish to connect.
3) The destination handset will ring, press
or key to enter conversation mode. To end intercom
mode, either handset can hang up the call by press
key.
Call transfer
During a call, it’s to transfer the call to another handset.
1) During a phone call, press
key once, you will be prompted to select the number of the internal
handset with which they wish to connect.
2) The destination handset will ring. With the melody defined for an internal call.
3) Press
or key of the other handset to accept the call.
4) The two internal handsets will be connected. To complete the transfer of the call, the initiating handset
should be placed on the cradle and the external call will now be connected to the second handset.
Three-way conference call
1) When a call comes, Press (HS1)
or key
2) Then press (HS1)
key once, you will be prompted to select the number of the internal handset with
which you wish to connect.
3) The destination handset will ring.
4) Press (HS2)
or key to accept call.
5) Press (HS1) then the
key then you can talk all together.
6) Press
to quit the three-way conference mode, then other parties can also continue to
communication.
Note: Due to continuous product development, all features and specifications are subject to change without
prior notice.
TROUBLE SHOOTING
No signal bar is displayed on the screen
The handset is out of range. Move it closer to the base station
No dialing tone
Check your phone connections
The handset is out of range. Move it closer to the base station
No docking tone
The handset is not placed properly on the base station/ charger