Instruction Manual

10
1) Press key. Using ∧ or ∨ key to select HS NAME
2) Press
key, and the display will show a flashing cursor on the name line.
3) Key in the handset name.
4) If you make a mistake, press R/CLR key to correct.
5) Press
key to confirm.
 AUTO ANSWER
The Handset can be set to answer an incoming call automatically by simply pick it up from the charging
cradle. The user is able to select to enable/disable this auto answer feature.
1) Press
key. Using ∧ or ∨ key to select AUTO ANSWER
2) Press
key to enter.
3) Press ∧ or ∨ key to select ON or OFF
4) Press
key to confirm your selection. Exit from this sub-menu and return the user to the AUTO
ANSWER
 BARRING
The handset can be set to disable 5 groups outgoing calls. The user is able to select to enable/disable this
feature. But the internal calls to intercom or conference will still be available.
1) Press
key. Using ∧ or ∨ key to select BARRING,
2) Press
key the user will be prompted to enter the PIN code, input 4-digit code (defaulted as 0000).
3) Press
key to confirm, then using ∧ or ∨ key to select ON or OFF, press key to confirm.
4) If select ON, the display shows NUMBER 1, press ∧ or ∨ to choose NUMBER i(i=1~4).
5) Then press
to confirm, using the numerical key to input number (maximum 4 digits) which you want
to barring. (For example: if you set barring number is 1234, then the numbers begin with 1234 will be not
allowed to be dialed out, and LCD display CALLS BARRED.)
6) Press
key to confirm. Repeat the above steps to set the rest of 3 groups.
 DATE & TIME
The user is able to set the date and time on the handset, by selecting the following option.
1) Press
key. Using ∧ or ∨ key to select DATE&TIME
2) Press
key and the last two digits of the year flashes.
3) Edit the year by pressing ∧ or ∨ key. Then use
key to confirm and enter the month value setting.
4) Using the same method for month, date and time setting.
Notes:
1) The date and time will be automatically set when the caller ID message is received in FSK.
2) When the unit is powered on initially, the date and time will be blinking, please to set the date and time
first according to use above methods.
 CONTRAST
The user is able to set the contrast of the LCD display, by selecting the following options.
1) Press
key to enter LCD display contrast settings.
2) Press
key. Using ∧ or ∨ key to select CONTRAST,
3) Press
key to confirm, then press ∧ or ∨ key to select from 1-8 levels.
 SELECT BASE
The handset can be registered to more than one base (up to a maximum of 4), and you can select which