User's Manual
Bluetooth Easy-Sync
BUTTON FUNCTIONS
LEFT BUTTON RIGHT BUTTON
WARNINGS
PACKAGE CONTENTS
CHARGING
TROUBLESHOOTING
CONNECTING TO BLUETOOTH PHONE HOW TO USE EARBUDS
WITH ACCESSORIES
QUICK START GUIDE
MODEL #’S
2bmtw0220w0g7
1
Turn on earbuds
(earbuds should turn on automatically
once taken out of charging case)
2
Turn on Bluetooth
on your phone or
bluetooth device
3
On phone select:
BPM Sound Pack
from list of available
bluetooth devices.
When earbuds do not sync together or
become disconnected during use.
1: Put Earbuds back into charging case.
Open up Bluetooth setting on your mobile
device and scan for
“ BPM Sound Pack ”.
Device cannot find Bluetooth earbuds
1: Check whether earbuds are charged.
If earbuds always disconnect or make
noise when playing: The bluetooth earbud‘s
power status is low, please charge it. Or there
may be obstructions between the mobile device
and the bleutooth earbuds or the distance is
beyond signal range (<32ft).
1: Auto Pairing: When taking out the
wireless earbuds from the charging
case the earbuds will automatically turn
on, sync together and enter pairing
mode.
*note: when in pairing mode only the right
headphone will flash red and blue. Once connected
all lights will turn o.
2: Activate Bluetooth on your mobile
device, find the pairing name
“ BPM Sound Pack ” and connect it.
The earbuds will re-connect with the
last device after re-start. If earbuds do
not re-connect, re-connect manually by
selecting earbuds from the bluetooth
menu list in the mobile phone device.
Disconnect from mobile device:
Disconnect manually by selecting the
earbuds name in your mobile device’s
bluetooth list and press the
disconnect button.
Read the below warning thoroughly before you start
using your headset. Store this manual with product
packaging. The safety precaution manual reduce the risk
of fire or injury when correctly complied to.
To reduce the risk of injury : Keep batteries out of reach of
children. Do not heat, open, or dispose of battery pack in
fire. Do not allow metal objects to touch the battery on
the device. Do not expose battery pack to excessive heat.
Connect the charging case to a power
supply with the included cable and
charge it completely (light will flash
red when charging, and will stay red
when fully charged.
Fully charge the case and earbuds
before using for the first time.
-If earbuds do not start charging when
put into case, press case power button
to manually make sure it starts
charging
-Warning: Earbuds should only be used
with provided charging case.
Phone calls: when call is incoming, unit
will pause playback and ring to alert
you of call. Press either earbud to
answer call. To end call press either
button.
Technical Specs:
Bluetooth version: 5.0
Battery capacity: Earphone battery 40mAh
Charging case battery: 300 mAh
Eective distance: 32ft
Earbud Working time: Up to 2 hours per charge
Standby time: 12 hours
Earbud charging time: About 1 hour
Charging case charging time: About 1.5 hours
(1) - left earbud
(1) - right earbud
(1) - pair of silicone eartips
(1) - silicone neckband
(1) - carrying charging case
(1) - charging cable
(1) - user manual
VOLUME DOWN (-):
Quick press 2 times
VOLUME UP (+):
Quick press 2 times
PREVIOUS SONG:
Quick press 3 times
NEXT SONG:
Quick press 3 times
OUTSIDE
FRONTBACKFOLDED IN
INSIDE
more
info
support:
877-543-3540
FOLDED IN
ON: Take earbuds out of case
OFF: Put earbuds into case
VOICE ASSISTANT: Press and hold for 2 seconds
PLAY/PAUSE: Press 1 time
ANSWER/END CALL: Press 1 time
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
EARBUD CONTROL
PRESS HERE
INDICATOR
LIGHT
CHARGING
POWER BUTTON
CASE CHARGING
PORT