Operation Instruction

12 13
(2) Install the bracket
1) Screw 󽗉xing:
Use the drilling tool to punch holes on the wall according
to the hole distance of the base. It is recommended to mark
the holes on the wall with a pencil before drilling. Screw the
expansion nut into the holes on the wall, and then connect
the bracket to the expansion nut with screws to complete the
󽗉xing.
Align the bracket screw with the screw hole on the back or bot
tom of the camera, and then rotate it to the tightened state.
2) Fix the camera
Adjust the camera to an appropriate angle, and then tighten
the base by rotating it in clockwise direction to 󽗉x the angle.
3)Adjust the angle