Operation Instruction

ManualsBrandsSHENZHEN CYTON Intelligence Technology ManualsCamera & PhotoWireless Smart Battery Camera

Table Of Contents

Wireless Smart Battery Camera

Contents

1.Packing list---------------------------------------01

2.Product appearance---------------------------02

3.Quick start---------------------------------------04

4.Power on/off and network configuration-----05

5.Set up the camra--------------------------------06

6.Install the camera---------------------------------11

7.Share the camera---------------------------------14

8.Charge the camera------------------------------16

9.Indicator light status--------------------------17

10.Product specification------------------------17

11.Firmware upgrade-------------------------18

12.FCC warning-----------------------------------18

13.FAQ-------------------------------------------20

Summary of content (13 pages)

PAGE 1
Contents 1.Packing list---------------------------------------01 2.Product appearance---------------------------02 3.Quick start---------------------------------------04 4 . Power on/off and network configuration----- 0 5 5.Set up the camra--------------------------------06 6.Install the camera---------------------------------11 7.Share the camera---------------------------------14 8.Charge the camera------------------------------16 9.
PAGE 2
Packing list 1. Camera*1 2. Bracket*1 3. Mounting kit*1 4. USB charging cable *1 5.
PAGE 3
Product appearance Wi-Fi antenna Micro-SD card slot Power button White light Infrared lamp MIC Lens Indicator light Micro-USB port Reboot hole Speaker Human body infrared sensor 02 03
PAGE 4
Quick start The wireless smart battery camera supports battery-powered supply and AC-powered supply. 1. Download and install the App The wireless smart battery camera supports Android and iOS App. For your best experience, please scan the QR code below, and follow the instruction to complete the user registration. Android Download App Store Download Download App 2.
PAGE 5
Set up the camera Click the "Add Camera Now" in the App and enter the Wi-Fi network name and password that you want the camera to connect. 06 To ensure a longer distance connection, the camera only supports the 2.4Ghz Wi-Fi with stronger wall penetration capability and does not support Wi-Fi for enterprise¬level authentication currently. Please ensure that the entered Wi-Fi meets the requirements. After completion, click "Continue" to generate the QR code for pairing the camera.
PAGE 6
2) After pressing the camera switch for 3 seconds, the camera will turn on. At this moment, target the camera at the QR code of the mobile App, with a distance of about 20cm (about 7 inches) until the camera emits a "Di" sound, which represents the scanning is successful and the pairing is started. 3) After a while, the camera will give out a prompt sound of a successful connection. At this moment, please set the name for the device on the App and select the location you want to place the device.
PAGE 7
Possible problems with binding: ●● When you hear the "Wi-Fi Password Error", please check whether the Wi-Fi password you entered in the App is correct; ●● When you hear the "Authentication error", please ensure that your Wi-Fi network is not an enterprise-level network, and the device supports only the network with the security level below WPA-2; ●● When you hear the "Wi-Fi not found", please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure th
PAGE 8
(2) Install the bracket 1) Screw fixing: Use the drilling tool to punch holes on the wall according to the hole distance of the base. It is recommended to mark the holes on the wall with a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with screws to complete the fixing. 3)Adjust the angle Adjust the camera to an appropriate angle, and then tighten the base by rotating it in clockwise direction to fix the angle.
PAGE 9
Share the camera When you need to view the camera with other family members or friends, you can use this function. Only the administrator whose account is bound with the camera for the first time can share and set the device. Other members can only view the live or playbacks of the device. 2) Click "Invite", and a QR code will be generated for sharing. 3) For the members you need to share, find "Add a Friend's Camera" on the "User" page to enter the scanning page.
PAGE 10
4) Scan the QR code generated on your mobile phone, and you will receive the confirmation notification after success. The sharing will be completed after you agree. Indicator light status Mode Status Sleep mode Off Working mode Charging mode Fully charged mode Blue Yellow Green Product specification Charge the camera The App will remind you to charge your camera when the battery is low. Please use the Micro USB cable to plug into the 5V/1.5A charging adapter to charge the camera.
PAGE 11
Firmware upgrade When you connect your camera through the App, it will prompt you if the latest firmware is available. You can also manually check the firmware version in the settings of the App. Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware, please do not cut off the power supply during the upgrading. FCC warning This device complies with part 15 of the FCC Rules.
PAGE 12
FAQ 1.Q:Camera permission management: How to invite family and friends to use my camera together? A: Open the App and select your camera on the home page. Click the share button on the home page or the "Share" in the camera settings to enter the sharing page, and then click "Invite " to generate a QR code. Your friends can now get some of the access rights by scanning the QR code in your phone. 2.
PAGE 13
V1.