User's Manual
Table Of Contents
- 1 Product Overview
- 2 Demo Operational instructions
- 3 Packaging and Storage
- 4 Services and Support
RD-M4
4-port UHF RFID Reading Module
19
2.4.6 Frequency Hopping Management
Select frequency hopping in the left menu bar of the RFID
configuration, as shown in Figure 10. Select“FCC902-928MHz”in
the“Frequency”drop-down list as shown in Figure 11, from the left
frequency list box, click“
”the button and import it into the right list
box, then click“Set”to determine.if you want to select the full frequency
hopping, click“
”, then click on the right side. The list box shows all
the frequencies in this band. Click“Set”to see Figure 12. If you
click“
”on the right list box, all frequencies will be cleared.
Figure 10
：
Frequency Hopping Management