User's Manual
Table Of Contents
- 1 Product Overview
- 2 Demo Operational instructions
- 3 Packaging and Storage
- 4 Services and Support
RD-M4
4-port UHF RFID Reading Module
16
2.4.4 Equipment configuration
The Demo main interface chooses“Device Control”->“Device
Configuration” and pops up the“Device Configuration”dialog box, as shown
in Figure 6.
Figure 6
：
Equipment configuration
The upper left of the window is the serial port parameters. As shown in
Figure 7, click“Get”to get the serial port communication baud rate
parameters of the reader, and click“Set”to set the serial port
communication baud rate of the reader. The baud rate is 9600 bps, 19200
bps, 115200 bps, 230400 BPS and 460800 bps. Others do not support it.
The default reader is 115200 bps.