User's Manual

RD-M4
4-port UHF RFID Reading Module
10
2.4 Demonstration software operation
2.4.1 Connect Reader
All functions can be operated only after successful connection.
2.4.1.1 Serial Communication Connection
Double-click on the icon
to start Demo software. Each icon in the
main interface toolbar is gray to indicate that the reader is not connected
yet. In the “Device Connection” option list, select the communication mode
“RS232 Connection”,“Param”select “COM?” (Selected PC serial slogans) and
select the communication rate “115200” (default value), and click “Confirm”.
as shown in Figure 1.
Figure 1
：
RS232 Selected