User's Manual

2.Battery life
If the device does not detect a moving object, the device will go into sleep mode
to reduce the power consumption of the device.
If the device detects a moving object, it quickly wakes up and starts within 1
second and takes a screen-shot and records a video.
Warm tip: The device uses a ternary lithium battery, when the battery is in a
low-temperature environment, the internal chemicals of the battery will slowly
solidify, the battery charging and discharging performance slows down, resulting
in a decrease in the capacity of the battery, the life of the device will be
seriously reduced.And the lower the temperature, the lower the battery capacity
will be, when the temperature is below -20 degrees, the battery has the probability
to enter the self-protection mode and shut down. But if the temperature rises,
the battery will automatically return to its normal state.
In cold winter, if the device needs to be charged, it is recommended to take the
device back inside the house and set it aside for an hour, the warm air in the
house will pull up the temperature of the battery before the charging action.
Then recharge it.
Why does the device have a poor battery life?
1.The working time of the device determines the battery life. The more frequently
the PIR wakes up and the number of alarms, the longer the working time of the
device. Please check whether the number of alarms is too frequent. It is
recommended to adjust the motion detection sensitivity of the device
appropriately and set the alarm interval and alarm time plan.
2.Check whether there are objects within the field of view of the device that
interfere with and trigger the PIR sensor, such as outdoor units of air
conditioners, moving cars, passing pedestrians, etc. The angle of the device can
be adjusted appropriately to avoid these objects prone to cause interference
3.The battery capacity will be reduced in cold weather, which will affect the
range of the device.
4.Contact Customer Service.
V. FAQs
For more detailed FAQs, please log in the APP, "Me"-"FAQ"-"Battery Camera".
Device prompted offline?
1) Check whether the equipment is in the energized state and observe whether the