User Guide Bluetooth Keyboard Model Name: X201 FCC ID: PD8X201
Getting started with your PowerCase Notebook Pro Step 1: Place your iPad/iPad Mini into the case 1. Slide your iPad/iPad Mini into the case 2. Close the Velcro strap to prevent the iPad from slipping out 3. Place the case to a comfortable position Step 2: Turn the Bluetooth keyboard on 1. Locate the on/off switch and Bluetooth button which can be found on the keyboard face in the top right hand corner. 2. Turn the keyboard on.
Step 3: Pair the keyboard and your iPad/iPad Mini 1. Press the Bluetooth key to send the Bluetooth signal 2. Turn your iPad on and select “Settings”---“General”---“Bluetooth” 3. Slide the Bluetooth to “On” and your iPad will start to search for Bluetooth devices 4. When it finds the “Bluetooth keyboard”, select it and begin pairing. 5. Enter the password displayed in the blue window and press the “Enter” key on the keyboard Please note that Step 3 is only required for the initial setup.
A: Caps Lock light – This will be lit when Caps Lock is on B: Power light (Capacity indicator B1, B2, B3 and B4, four levels) When charging the battery via the micro USB port the current capacity indicator will flash. When fully charged, four indicators will illuminate in blue, without flashing. When charging your iPad or other mobile devices via the standard USB port: o The current capacity indicator will flash on and off.
+ Language Switch + C Copy + V Paste + X Cut + Z Redo + To the top of the text + To the end of the text + Delete the whole line Shift + Select text rightward Shift + Select text leftward Shift + Select text upward Shift + Select text downward Step 5: Charging your Notebook Pro 1. Select your (supplied) micro USB to standard USB lead 2. Plug the standard USB end into your power source (this could be a laptop or a USB compatible power plug) 3.
1. To charge your iPad/iPad Mini simply use the standard USB to 30 pin connector lead supplied as indicated In this image. 2. If you have an iPad 4 or iPad Mini, simply use your own charging cable. 3. You can also charge other Apple products such as the iPhone 4/4s using the Standard USB to 30 pin connector lead supplied as indicated In this image. 4. Other devices can also be charged using your device specific charging lead in the same way.
Then, you should charge the battery. Check the power switch, make sure it is on. Restart the Bluetooth switch, make sure your iPad/iPad Mini can find this device Ensure the password for pairing is correct.
Important Regulatory Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
