User's Manual

12:45 PM
100%
WiFi
Data
Item
Tran smitter：CP07029
5150~5250、5725～5850MHz
receiver sensitivity
≤ -87dBm
2x2 MiMO External antenna RPSMA male 50Ωantenna gain 2dBi
IEEE 802.11n
200mS
OS Requirements for
Handheld device
iOS 5.0；Android4.0
Basic Functions
Support live streaming, taking picture, recording and playback
Support up to 3 smartphone clients live stream the footage simultaneously
Power Supply
Built in 3.7V Lithium Battery
Operating Hours
Approx 7H
≤1.5W
Rec eive r：CP03 029
90.5mm (W) x 64.5mm (H) x 21.5mm (D)
12:45 PM
100%
12:45 PM
100%
Boot screen
Taking Pictures,
Recording and playback
Smartphone APP
SPECIFICATION
1. Mount the antenna on the top of receiver.
2. Put the binding belt through the slot of receiver
rear side.（Picture 2）
3. Fasten the receiver on arm or other desired
places.（Picture 3）
1
2
3
4. Search and connect tablet and Smartphone to Wifi AP of receiver
(FREECAST****Password:12345678), after wifi AP connected,
run corresponding App for live streaming, real-time monitoring,
taking picture, recording, playback and other operations.
(as illustration shows)
5. In outdoor operation, you can supply power to the receiver by
USB cable.
Receiver CP03029 Installation
Antenna
Dimensions
Transmission Range
Latency
External antenna interface
and impedance
Frequency
Power Consumption
Temperature
Wireless Standard
Up to 300-500m
-10 °C ~ +50°C（Operating）；-20~+75°C（Storage）
17 18
92mm (W) x 53mm (H) x 21.5mm (D)
Dimensions
Transmission Power 6
dBm
Transmission Range
Up to 300-500m
Latency
200mS
External antenna interface
and impedance
Frequency
5150~5250、5725~5850MHz
Video Bitrate
Constant Bitrate 2Mbps
Resolution
1080P60Hz;720P60Hz
Operating voltage
3.3V-4.2V Lithium Battery Powered
Power Consumption
Approx 3W
Temperature
-10 °C ~ +50°C（Operating）；-20~+75°C（Storage）
Weight
Waterproof grade
IP68
400G (including battery and antenna)
Video Encoding format
H.264 image compression
RPSMA male, Impedance 50Ω
IEEE 802.11n
Wireless Standard