User's Manual
17
18
RX:CV6620 TX:CV6608
1
3
RX:CV6620 TX:CB2601
2
Press the code keys
simultaneously for
3~5 Sec
TX:CB8801/CB8808
RX:CV6620
NN
EE
TT
WW
OO
RR
KK
VV
II
DD
EE
OO
TX2:CB8801W
Stick0203
TX1:CV6608W
DVB
TX3:CV6608W
SONY BD
VI
DEO
NE
TWO
R
K
H
1
V
2
RX1:CV6620W RX2:CB3801W
Connecting to Stick0203...
OSD Display
VIDEO NETWORK
Code matching are defult set in factory ,user do not need to repeat this operation.
Operation of re-matching code for TX and RX
1. Power on transmitter and receiver.
2. Use tweezers or paper clips to press the code key of transmitter and receiver for
5 seconds and then loosen from the code key.
3. Wait for 30 to 60 seconds, the network indicators of transmitter and receiver will
turn on, after that, the code matching is successful. If code matching is not
successful, please repeat the code matching procedures.
Unicast (point-to-point) Code Matching Procedures
*Product model suffix with a "W" means supporting WHDI function.
Supported model: CV6608W, CV6620W, CB8801W, CB8808W, CB3801,CB2601W
WHDI (Multipoint-to-Multipoint/Multi-cast) function means that a receiver can be
connected to many transmitters respectively, and the transmitter can also be
connected to different receivers respectively. Users can choose to connect to any
different transmitter by WHDI remote control at receiver's side.(HD video source)
Example Applications of WHDI Function (3 transmitters and 2 receivers )
1. Match code of 2 receivers with 3 transmitters respectively.
2. Connect transmitter to different HD device source respectively by HDMI cable
and power on the devices.
(As to the device installation instruction, please refer to the installation
instructions for specific model of product on P09)
3. Connect 2 receivers to HDTV respectively by HDMI cable.
4. Power on receiver and HDTV, the receiver will automatically connecting to
the transmitter which was connected with the receiver successfully last time,
the OSD information on TV screen will be prompted as the following picture:
WHDI Function
Press the code keys
simultaneously for
3~5 Sec
Press the code keys
simultaneously for
3~5 Sec