User's Manual
15
16
HD Player
IR remote
extension connector
Transmitter
Receiver
HD
TV
Remote
control
1
2
NN
EE
TT
WW
OO
RR
KK
VV
II
DD
EE
OO
VIDEO NETWORK
RX:1.x.xx
1920x1080P Freq:5xxx
NETWORK CONNECTING...
Receiver
HD TV
Remote controller
Tran smitter
Connected to CB3801
3. Wait for 15 to 25 seconds, the network and video indicators will turn on, the
video connection is successful. OSD information on projector (HDTV ) screen will
be prompted as “Connected to CB3801" and display video source content of PC/
Laptop.
Notice: As to the specific model of transmitter's installation steps, please refer to
the product installation instruction in this chapter.
IR Remote Extension Connector Instructions
Use HD player's remote control at TV's side to control HD player.
Operating Instructions
1.Plug the IR extension cable into the slot out jack of transmitter, place the IR
remote extension connector in front of the player.
2.When the system is working properly, users can use HD player's remote control
at TV side to control HD player; it should be aligned to IR sensor window of receiver.
Remarks
(1) Remote extension connector only supports 38KHz remote's signal protocol.
(2) Please make sure the transmitter and receiver are located in the effective
reception distance and range, if they are located out of the range, the signal
wouldn't be received.
Basic Function