User's Manual

11
12
N
E
T
WO
RK
VID
E
O
VIDE O NETW ORK
RX:1.x.xx
1920x1080P Freq:5xxx
NETWORK CONNECTING...
Receiver
HD TV
Remote control
Transmitter
Connected to CB3801
3. Wait for 15 to 25 seconds, the network and video indicators will turn on, the
video connection is successful. OSD information on projector (HDTV) screen will
be prompted as “Connected to CB3801" and display video source content of PC/
Laptop.
Notice: As to the specific model of transmitter's installation steps, please refer to
the product installation instruction in this chapter.
N
ET
W
OR
K
V
ID
EO
TX2:CB8801W
Stick0203
TX1:CV6608W
DVB
TX3:CV6608W
SONY BD
VIDEO
NETWORK
H1
V2
RX1:CV6620W RX2:CB3801W
Connecting to Stick0203...
OSD Display
VIDEO NETWORK
WHDI (Multipoint-to-Multipoint/Multi-cast) function means that a receiver can be
connected to many transmitters respectively, and the transmitter can also be
connected to different receivers respectively. Users can choose to connect to any
different transmitter by WHDI remote control at receiver's side.(HD video source)
Example Applications of WHDI Function (3 transmitters and 2 receivers )
1. Match code of 2 receivers with 3 transmitters respectively.
2. Connect transmitter to different HD device source respectively by HDMI cable
and power on the devices.
(As to the device installation instruction, please refer to the installation
instructions for specific model of product on P09)
3. Connect 2 receivers to HDTV respectively by HDMI cable.
4. Power on receiver and HDTV, the receiver will automatically connecting to
the transmitter which was connected with the receiver successfully last time,
the OSD information on TV screen will be prompted as the following picture:
WHDI Function