User's Manual

05 06
connect Mini USB input port to the computer’s USB port or the 5V/1A power
adapter by the USB cable for power supplying.
* HID Keyboard/Mouse Remote Control function is supported when connected the
mini USB input port to the computer.
Connect to the HDMI Output port of a HD AV source device.
Connect to the VGA port of computer.
Connect to the audio output port of computer by the audio cable.
Code Key Function: press the code key for 5 seconds , the transmitter will turn into
the code matching process.
1. MINI USB INPUT PORT
2. HDMI IN
3. VGA IN
4. AUDIO IN
5. CODE KEY
6. NETWORK INDICATOR
On: The wireless network connection between transmitter and receiver is successful .
Flash Slowly: Transmitter is ready for connecting.
Flash Rapidly: The device is faulty.
On: The HD AV source is connected successfully.
Off: The HD AV source is failed to connect.
Note: The extended function which marked in * requires hardware supporting, as to
more detailed information, please refer to the operation instructions of HID Keyboard/
Mouse Remote Control function on P23.
7. VIDEO INDICATOR
CB3801
Wireless HD Receiver
Model: CB3801
MINI USB IN
DC IN
IR IN
NET WORK INDICATOR
VIDEO INDICATOR
HDMI IN
CODE KEY
Receiver Interface Introduction
1. DC IN
2. HDMI IN
3. MINI USB INPUT PORT
4. CODE KEY
5. NETWORK STATUS INDICATOR
6. VIDEO INDICATOR
Connect this port to 5V/2A power adapter ( spec: 5.5mm, DC 5V ).
Connect to HDMI Output of a HD display devices (HDTV, projector).
* HID Remote Control function is supported when connected the mini USB input port
to the Mouse or keyboard.
Note: MINI USB port do not support power supply
Code Key Function: press the code key for 5 seconds , the receiver will turn into the
code matching process.
(It needs to use remote control to match code under WHDI software mode)
On:The wireless network connection between transmitter and receiver is successful .
Flash slowly: Transmitter is ready for connecting.
Flash rapidly: The device is faulty.
On: The video source is connected successfully.
Off: The video source is failed to connect.
Note: The extended function which marked in * requires hardware supporting, as to
more detailed information, please refer to the operation instructions of HID
Keyboard/Mouse Remote Control