User's Manual

First lock the Sunshade Frame ②with the monitor tight ③.

Open the sunshade ①, and match the sticker on the sunshade inside to

the marked part of the sunshade frame ②, smooth and press 3 sides on

the sunshade, and then complete the sunshade installation ④.

2. Menu Operation Instruction

After the monitor is properly connected to the power supply, the

indicator light is on (red). Press button to turn on the

monitor power. The indicator light turns yellow. After inputting the HDMI

signal, the indicator light turns from yellow to green.

After startup, short press to select to turn the screen touch

function on or off.

After the transmitter input the HDMI signal, the receiver will receive the

signal from the transmitter, will display simultaneously for both monitors.

Swipe the right side of the screen to display the transmission function

including switch, signal, 4 channels and WPS pairing. Long

press until it turns red to close the wireless video transmission

function.

TX RX