Product Info

ManualsBrandsShenzhen Creality 3D Technology ManualsComputers & AccessoriesCreality Sonic Pad

4. Click Connect automatically after activation, the camera will be

enabled when the Creality Sonic Pad is powered on. Click to enable

time lapse video, and the camera will shoot the printed model accord-

ing to the set number of layers and rendering methods. After the

shooting is completed, a time lapse video ﬁle will be automatically

generated. Click the icon in the lower right corner to view.

5. Enter the time lapse video ﬁle storage folder, it will display the ﬁle

thumbnails and print information, click the display list to enter the

ﬁle management mode.

6. Enter the ﬁle management mode, you can choose to play, share,

export and delete videos.

Summary of content (19 pages)

PAGE 1
4. Click Connect automatically after activation, the camera will be enabled when the Creality Sonic Pad is powered on. Click to enable time lapse video, and the camera will shoot the printed model according to the set number of layers and rendering methods. After the shooting is completed, a time lapse video ﬁle will be automatically generated. Click the icon in the lower right corner to view. 5.
PAGE 2
10. Slicing software displays previews and thumbnails 1. Ultimaker Cura 5.1.0 1.1 Add thumbnails on Ultimaker Cura 5.1.0, select "Extensions" - "Post Processing" - "Modify G-code". 1.2 After entering, select the post-processing script shown in the ﬁgure (‘’Add a script’’-’’Create Thumbnail), and a red dot will appear in the post-script prompt box next to the slice button. 1.3 After the slicing is completed, export it in ufp format and upload it using a U disk or WEB terminal.
PAGE 3
2. PrusaSlicer 2.4.2 2.1 Added thumbnails and previews on PrusaSlicer 2.4.2. In “Expert” mode, you can add a custom-sized thumbnails and previews in "Printer Settings"-''Firmware'"-"G-code thumbnails". 3. SuperSlicer 2.3.5 3.1 Added thumbnails and previews on SuperSlicer 2.3.57. In expert mode, you can add custom size thumbnails and previews in "Printer Settings" - "Thumbnails" - ''Size for gcode''. 4.
PAGE 4
.2 In the printer management interface, check "Generate preview", and select the preview image size to add a preview image of a custom size. 11. Adaptation of other printers 1. Printer Firmware Compilation Please download the ﬁrmware compilation guide on the ofﬁcial website: Ecosystem https://www.creality.com/pages/download For ﬁrmware compilation environment construction, please refer to the video tutorial: Ecosystem https://www.creality.com/pages/download 2. User-deﬁned printer usage process 2.
PAGE 5
2.2 The printer needs to ﬂash the self-compiled ﬁrmware ﬁrst, then save the corresponding conﬁguration ﬁle Printer.cfg into the USB drive, insert the Creality Sonic Pad, and click Next step. 2.3 After the conﬁguration ﬁle is detected, click Loaded to load the conﬁguration ﬁle. 2.4 At this point, a pop-up window will prompt you to ensure that the printer ﬁrmware has been ﬂashed and connected to the machine.
PAGE 6
2.5 Make sure the printer ﬁrmware has been ﬂashed and connected to the machine, click OK, Creality Sonic Pad will load the conﬁguration ﬁle and prompt for self-test. 2.6 Click Start self-test to enter the self-test process. For the self-test process, please refer to the self-test process of “First Use” to guide the installation. 12. The use of WEB operation terminal 1.
PAGE 7
3. Open the web browser console. Make sure that the PC and the Creality Sonic Pad are in the same local area network, enter the obtained IP address of the Creality Sonic Pad into the browser, or the local area network domain name spad-DN.local(DN is the ﬁrst four digits of the screen DN number). (Example: http://172.23.214.236 or http://spad-8888.local) 13. FAQ Please visit the ofﬁcial website for more solutions to common problems: https://www.creality.com/pages/faq?spm=..page_1934 481.header_1.
PAGE 8
Abort printing during printing 1.Check that the printer is properly connected to the Creality Sonic Pad. 2.Check whether the power connection of the Creality Sonic Pad and the printer is normal. Time-lapse photography did not shoot successfully 1. Enter conﬁguration-camera to see if there is a real-time image, if there is no real-time image, it should be turned on ﬁrst; 2. Conﬁrm that the camera is a general-purpose USB camera, and the real-time screen has been turned on; 3.
PAGE 9
Abnormal reading of U disk 1. Check whether the USB drive is normal, insert the USB drive into the computer, try to repair the USB drive ﬁle system or format, or replace the USB drive and try again; 2. Check whether the USB interface is normal, and try another USB interface; 3. If the card reader is used, please try to replace the card reader (or memory card) to determine whether the function is normal. The print is misplaced 1.
PAGE 10
How to compile ﬁrmware and modify conﬁguration ﬁles for non-default printers ? Please refer to the printer adaptation guide link. What should I do if the Ender-3 V2 cannot be connected during the booting operation or one-touch change? The model should be selected according to the actual situation when booting up or one-touch change. The motherboard version needs to be disassembled to check, and the corresponding relationship between the four choices of Ender-3 V2 a.
PAGE 11
Join the Facebook Community https://www.facebook.com/groups/sonicpad +86 755 3396 5666 cs@creality.
PAGE 12
V2.
PAGE 13
感谢您选择创想三维的产品。为了您使用方便，请您在使用之前仔细阅读本说明书，并严格按照说明书的指示进行操作。创想三维团队时刻准备为您提供优质的服务。在使用过程中无论遇到什么问题，请按照说明书结尾所提供的电话、邮箱与我们进行联系。您还可以登陆创想三维官网 (www.cxsw3d.
PAGE 14
目录一. 产品说明 01 二. 包装清单 01 三. 接口及按键说明 02 四. 运行注意事项 03 五. 首次使用 03 六. 日常使用 07 七. 系统升级 10 八. 高级设置 11 九. 延时摄影 14 十. 切片软件显示预览图和缩略图 16 十一. 自定义机型适配 18 十二. WEB操作端的使用 20 十三.
PAGE 15
一. 产品说明 Creality Sonic Pad 通过USB数据线连接FDM 3D打印机后，变为打印机工作的核心系统。硬件规格 CPU T800 运行内存 2GB 存储内存 8GB USB 2.0 接口 4 屏幕分辨率&尺寸 1024x600 & 7 Inch WIFI 协议 IEEE 802.11b/g/n LAN 口 100M Gsensor 接口 PS/2 电源接口 DC 2.5 输入电压 12V 二.
PAGE 16
1. 主机 x1 2. 12V电源适配器（含转接头）x1 3. G-sensor 数据线 x1 4. G-sensor x1 5. USB连接线 x1 6. U盘 x1 7. MicroUSB 转 MiniUSB x1 8. MicroUSB 转 Type-C x1 9. 说明书 x1 10. 螺丝包 x1 三.
PAGE 17
USB 1 系统状态灯电源指示灯电源开关 M3安装孔 M3安装孔 USB 2 四. 运行注意事项 1.请严格按本说明书使用产品，避免造成意外的人身伤害和财产损失; 2.请将本机放置在通风、阴凉、少尘的环境中，远离易燃易爆物或高热源环境; 3.请使用本机附带的电源适配器，防止造成机器损坏; 4.请勿将本产品放置在震动或者其它不稳定的环境中; 5.请定期在断电的情况下用干布对机身做清洁; 6.使用者应遵守设备所在地国家、地区法律法规，恪守职业道德，注意安全，严禁将我司的产品或设备使用在任何非法用途上。如有违反，产生的相关法律责任我司概不负责。五. 首次使用 1. 设备连接 1.
PAGE 18
1.2 USB数据线一端连接Creality Sonic Pad USB接口，另一端连接3D打印机（请选择相应打印机的转接头）。 USB DC CAM LAN SENSOR 2. 开机设置连线完成后，按下Creality Sonic Pad电源按键，进入开机引导操作（按引导指示顺序进行产品配置）。 2.1 开机画面 2.2 选择语言 2.3 选择地区 2.4.1 网络设置（此步骤可跳过） 2.4.2 添加网络（接上一步，跳过则无此步骤） 2.4.
PAGE 19
2.5 隐私政策，用户阅读同意后点击下一步。 2.6 设备重命名。 2.7 打印机固件烧录 2.7.1 选择机型（用户需要拆开打印机查看主板芯片型号）。 2.7.2 以Ender-3 S1机型为例,选择机型后进入刷机引导页面，请自行准备读卡器及存储卡，用于打印机刷机使用。 2.7.